ADEMCO Accord Manual de instalación descargar pdf (Pagina 36)

Set to 2 (Technistore): User code can cancel a day tamper activation but a Technistore

reset number must be entered to reset the system.

Set to 3 (Engineer or Technistore): User code can cancel a day tamper activation but

either the engineer code or a Technistore reset number must be entered to reset the

system.

This option defaults to 0 (customer).

Note: This option only affects Tamper conditions occurring when the system is

unset. It does not affect tamper conditions occurring when the system is in one

of the set modes; these tamper conditions are covered by menu option Group 5

– Option 3 Engineer Reset for Alarms.

Group 5 - Option 9 Zone Configuration

The zones on the Accord xpC function as Normally Closed, Double Balanced, U.S.

End of Line.

0. Normally Closed

1. Double Balanced

2. U.S. End of Line

This option defaults to (0) Normally Closed.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 77 78

Sin comentarios

ADEMCO Accord Manual de instalación Pagina 36