ADEMCO 5130XM Manual de instrucciones descargar pdf (Pagina 19)

lx.

SPECIFICATIONS

4140XM CONTROL

Physical:

Width:

12 inches (305mm)

Height:

12 inches (305mm)

Depth:

3 inches (76mm)

Electrical:

VOLTAGE INPUT: 18VDC, 85o mA max. (from plug

in Power Pack, Ademco No. 136o)

RECHARGEABLEBACK-UPBATTERY:12VDC, 4 AH

(Gel type)

A!ARM SOUNDER OiJTPi.JT:Wet contactrelay (2.8A

max. contact rating @ 28VDC). Can drive 12V

motor driven blla (100 mA each) - AMSECO

MSB1OG or ABB1031.

AUXILIARY POWER OUTPUT: 11,5- 14.OVDC

700 mA for non-UL installations

400 mA max. for UL installations

STANDBY. 5.7 hours with Auxiliary load of 700

mA using 4 AH Battery. 8.5 hours with Auxiliary

load of 400 mA using 4 AH Battery

Fuses:

Battery Fuse: 3A Slo Blo (Ademco No. 90-28)

Auxiliary Powec 1A (Ademco No. 90-29)

Alarm Relay Powrm 3A Sio Bio (Ademco No. 90-28)

DIGITAL COMMUNICATION INTERFACE

BOARD (4171 XT-XM)

Phyelcal: 5-3/4” (14.6 cm) x 3-1/8= (8.25 cm)

x 7/8. (2.2 cm) (approx.).

Functional:

FORMATSSUPPORTED

ADEMCO LOW SPEED, 10 pUk3/sOC. 1900 HZ

Data Tone, 1400 Hz ACiVKISSOFF.

SESCO/$ 20 puhee/eec, 1800 Hz Data Tone,

2300 Hz ACWKISSOFF, Variable Interdigit

Timing.

RADIONICS, 20 puieeamec, 1800 Hz Data

Tone, 2300 Hz ACWKISSOFF, Fixed Interdigit

Timing.

ADEhCO CONTACTID

LINE SEi2f2 DoublePole

RINGER EQfJfVALENCE0.7S

FCC REGISTRATION NO.: AC 3g8U-66192-AL-E.

5130xM/4130xM

Physical: Width:

Height:

Depth:

Electrical:

CONTROLS

8.4 inches (21.3cm)

4.75 inches (12.1 cm)

1.1 inches (2.8 cm)

VOLTAGE INPUT: 18VDC (from plug-inPower Pack,

Ademco No. 1350), 700 mA max.

RECHARGEABLEBACK-UPBATTERY 12VDC, 1.2 AH,

Ademco No. 484 (YUASA NP 1212). (Alternatively, a

4 AH Ademco No. 486 may be used”).

ALARM SOUNDER: Built-inpiezoeiectnc sounder,

85 db at 10 feet. Sound producedis selectableas

‘steady” (in

compliance with UL 85 db output

requirement) or ‘sweeping” (for non-UL usage).

Optional external 12V Piezoelectric alarm sounder

(100 mA max.). (Ademco No. 740 or BRK PA400B).

Optional 12V motor-driven Bell (100 ma max.).

(AMSECO MSB1O-G or ABB-1031).

Optional dry contact relay (2.8A max. contact rating

@26VDC). Ademco No. 4148°. Can drive No. 719 or No.

702 Siren.

AUXILiARY POWER OUTP~ 1O.2-13.8VDC

280 mA for non-UL installations

200 mA max. for UL installations

STANDBY: 2.5 Hours with 200 mA standby currant

load. 5 Hours with no external currant load.

‘Not available in a UL installation.

5137/4137

REMOTE CONSOLES

Ph ysicel: Width: 8.4 inches (213 mm)

Height: 4.75 inches (121 mm)

Depth: 1.1 inches (28 mm)

Eiectricai:

Voltage Input 12VDC

Current Drain:

80 mA (4137) continuous

90 mA (5137) with back iighting

interface Wiring:

RED: 12VDC input (+) - auxiii~ power

BLUE: 18VDC input (+) - from optional 1350 or

1360 Power Pack*

GREEN: Datain

YELLOW: DataOut

BLACK Groundand (-) connectionfrom

optional 1350 or 1360 Power Pack.

● Not permitted for UL installations.

TO THE INSTALLER

Reguiar maintenance and inspection (at least annuaiiy) by the instaiier and frequent testing by the user are vital

to continuous satisfactory operation of any aiarm system.

The instaiier shouid assume the responsib~ of developing and offering a reguiar maintenance program to the

user as well as acquainting the user with the proper operation

and imitations of the alarm system and its

component parts. Recommendations must be inciuded for a specific program of frequent testing (at

least

weekiy) to insure the system’s proper operation at all times.

-17-

/u5

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Comentarios a estos manuales

Sin comentarios

ADEMCO 5130XM Manual de instrucciones Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO 5130XM