ADEMCO 5130XM Manual de instrucciones descargar pdf (Pagina 13)

— POWERING THE SYSTEM —

PRIMARY POWER

Power

to the 4140XM Control panel is supplied by a

Plug-In DC Power Pack, 1360. which is rated at

850 mA @ 18 volts DC. The 4130XM and 5130XM

Controls are supplied by a 1350 Plug-In DC Power

Pack rated at 700mA @18 volts DC. Since these

power packs supply unregulated DC, and because

they are polar~ed (+) & (-), caution must be taken

when wiring them to the Controls.

BACK-UP POWER

In the event of an AC power loss, all VISTA XM

Controls are

supported by a back-up, rechargeable

gel cell battery.

BATTERY STANDBY TABLE

4130 XM/513d XM 4140XM

AM P-HRS

200 fnA 400 mA

700m A

POWER-UP PROCEDURE

1. Wire the 1350 (1360) DC Power Pack first

(before the battery), making sure polarity is

correct and the terminal strip (or harness) is

connected to the Control panel as shown in the

SUMMARY OF CONNECTIONS diagrams.Do not plug

in at this time.

2. Connect all auxiliary devices, such as

consoles, PIRs, etc.

3. Plug the 1350 into an AC outlet. Check that the

Auxiliary Voltage measures between 13.5 and 14.0

volts DC. If under 13.5 volts, too much current is

being drawn from the Control. See the

SPECIFICATIONS section of the

Technical Reference

Manual

for the current draw of each device.

4. Connect the battery as shown in the SUMMARY

OF CONNECTIONS diagrams. Do not connect the

battery if Auxiliary Voltage is below 13.5 volts, as

this will prevent the battery from being fully

charged.

1.2

3.0 hrs.

NW NIU

4.0

10.0 hrs.

10.0 hrs. 5.7 hrs.

6.0

15.0 hrs.

15.0 bra. 8.5 hrs.

NOTE: The above figures are approximate, and

may vary depending upon the age, quality, and

capacity of the battery at the time of the AC loss.

CAUTfON: If total current draw is above the

maximum auxiliary current availabfe, a 1350

power pack* must be used to power up to 7

additionalremote consoles. If only one console is

being used, power additional devices from a

separate 12VDC power source (i.e. 468-12).

● Not allowed for UL installations.

EMTH

*,&E’

GELCELL

SATTERV

~ f4.Mm~br

CAWWO&‘oBSWVE~lW

UL @IU——W@

“KEEP WIRERIMSASSNORTASP04SlSLE1

‘4.MNMINIMUN

SAITERV CAPACITY

%.- UAXIMIM M1’nmv CAPACITY

4140XMPOWSR PACKM-V CONNECTIONS

s1s41WXM POWM PACK ANO 9ATTSRYCONNS~ONS

-11-

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Comentarios a estos manuales

Sin comentarios

ADEMCO 5130XM Manual de instrucciones Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO 5130XM