ADEMCO Vista-128B PLUS Guia de preparacion descargar pdf (Pagina 13)

– 13 –

1*52 SEND CANCEL IF ALARM + OFF [1]

1=no restriction; 0=within Bell Timeout period only

SIA Guidelines: Must be enabled “1”.

1*76 ACCESS CONTROL RELAY FOR PART.[00] |

Relay will be pulsed for 2 seconds whenever code + [0] is

pressed. Enter 00-96; 00=none.

Must be "00" for UL installations.

3rd Page Fields

2*05 AUTO-ARM DELAY [15] |

Enter the time between the end of the arming window and

the start of auto-arming warning period, in values of 1-14

times 4 minutes 00=instant; [15=no auto arm at all]. When

this delay expires, the Auto-Arm Warning Period begins.

2*06 AUTO-ARM WARNING PERIOD [15] |

This is the time during which the user is warned to exit the

premises prior to the auto-arming of the system (beeps

every 15 seconds; "ALERT" displayed). Enter 01-15 minutes.

00=instant at end of arming delay .

2*07 AUTO-DISARM DELAY [15] |

This is the time between the end of the disarming window

and the start of auto-disarming. Enter 01-14 times 4 minutes;

00=instant at end of window; 15=no auto-disarm

2*08 ENABLE FORCE ARM FOR AUTO-ARM [0]

0=disable; 1=enable

2*09 OPEN/CLOSE REPORTS BY EXCEPTION [0]

1=enable; 0=disable If enabled, only openings and closings

occurring outside the scheduled opening/closing windows

will trigger dialer reports. Opening reports will also be

suppressed during the closing window, in order to prevent

false reports when the user arms the system and then re-

enters the premises to retrieve a forgotten item.

2*10 ALLOW DISARMING ONLY DURING [0]

ARMING/DISARMING WINDOWS

See system-wide field 2*11 if enabling field 2*10. This

feature adds high security to the installation.

0=disable; 1=enable

2*18 ENABLE GOTO FOR THIS PARTITION [0]

1=Allow log-on from other partitions; 0=disable

2*20 ENABLE J7 TRIGGERS BY PARTITION [1]

0=disable for displayed partition; 1=enable for displayed

partition

2*22 DISPLAY FIRE ALARMS OF [0]

OTHER PARTITIONS

0=No; 1=Yes

2*23 DISPLAY BURG/PANIC ALARMS OF [0]

OTHER PARTITIONS

10=No; 1=Yes

2*24 DISPLAY TROUBLES OF OTHER [0]

PARTITIONS

0=No; 1=Yes

SUMMARY OF PROGRAMMING COMMANDS

• To enter program mode, enter installer code + [8] + [0] +

[0] + [0]

• To set standard defaults, press *97

• To change to next page of program fields, press *94

• To return to previous set of fields, press *99

• To erase account and phone number field entries,

press [*] + field number + [*]

• To assign zone descriptors, press #93 + follow menu

prompts

• To add custom words, press #93 + follow menu prompts

• To enter Installer's Message, press #93 + follow menu

prompts

• To exit program mode, enter *99 OR *98: *99 allows re-

access to programming mode by installer code. *98

prevents re-access to programming mode by installer

code.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 71 72

Comentarios a estos manuales

Sin comentarios

ADEMCO Vista-128B PLUS Guia de preparacion Pagina 13

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Vista-128B PLUS