ADEMCO 4120XM Guía de usuario descargar pdf (Pagina 49)

●29 Quick Arm

(O=no/l=yes)

●3O Touch-Tone Or Rotary

Dial

(Q=R/1=-IT)

●31 PABX Access Code

Enter 1 to enable arming of the burglary system in any mode by using the # key

instead of the security code (just # key depression followed by the command

AWAY, STAY, INSTANT or MAXIMUM). When armed AWAY or MAXIMUM,

reports closing as User #7 if open/close reporting for User #7 was enabled in field

●39. Enter Oif Quick Arm is not desired. (The 4-digit code must always be used to

disarm.)

See field 1

●33 for Touch-Tone w/Rotary backup

Important!: Do not select a dialing method that is not legally permitted by the

telephone company for the particular subscriber. If selecting TouchTone, make

sure the subscriber has requested and is paying for TouchTone service. NOTE:

Whether or not TouchTone dialing for call placement is permitted, communication

by the use of DTMF signaling (Ademco High Speed) will still take place.

Enter up to four 2-digit numbers 00-09; B-F(11 -15). If not required, enter nothing

and proceed to next address; otherwise, enter prefix needed to obtain an outside

Telco line. This field may be used alternatively to enter a prefix that can suppress

the Telco’s call waiting feature from interfering with outgoing transmissions. This

prefix is only useful if the Telco option to suppress call waiting has been obtained

by your customer. The prefix to be used is 01010700 if rotary dialing is being

used or 140700 if TouchTone dialing is being used.

Each entry is a 2-digit entry so as to allow use of hexadecimal digits (B-F). Use

the following chart to determine the entry for each digit. Only enter digits

required. Do not fill unused spaces. Erase the field by entering

●31●.

NUM~FR_EMT.ER

o 00

8 08

1 01 9

\~ not use)

3 03

04 : 12

05 D 13

; 06

Eorx 14

For# 15

●32 Primary Subscriber Enter 3 or 4 numbers 00-09; B-F(11 -15). Each digit requires a 2-digit entry so as

Account Number

to allow entry of hexadecimal digits (B-F). If a 3 digit number is to be used, only

enter data in the first 6 locations, leaving the last two unfilled. Erase the field by

entering

●32*. Default=15 15 15 15.

●33 Primary Phone Enter up to 12 digits, O-9. Do not fill unused spaces. Erase the field by entering

Number

●33*. NOTE:

Back-up reporting (8 calls are made to the secondafy phone number

if no acknowledgment is received after 8 attempts to the primary number) is

automatic only if there is a secondary phone number (*34) and secondary

account number ~90) entered.

●34 Secondary Phone

Enter up to 12 digits, O-9. Do not fill unused spaces. Erase the ,field by entering

Number

*34*.

If this field is programmed, a secondary subscriber account number (field

*90) must also be programmed (can be the same as the primary account

number).

●35 Download Phone

Only applicable if downloading will be utilized. Enter up to 12 digits (O-9). Do not

Number

fill

unused spaces. Erase the field by entering *35*.

●36 Download Id Number Only applicable if downloading will be utilized. Make entries as 2digit numbers as

follows (default =15 15 15 15 15 15 15 15):

00=0 03=3 06=6 09=9 12=C 15=F

01=1 04=4 07=7

10=A 13=D

02=2

05=5 08=8 ll=B 14=E

—49—

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 79 80

Comentarios a estos manuales

Sin comentarios

ADEMCO 4120XM Guía de usuario Pagina 49

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO 4120XM