ADEMCO VISTA-15PSIA Especificaciones descargar pdf (Pagina 37)

– 37 –

REPORT CODE FORMATS

The following table describes the communication formats.

FORMAT TYPE DESCRIPTION

3+1 and 4+1

Standard Formats

Ex. SSS(S) A

Comprises a 3- (or 4-) digit subscriber number and a single-digit report code (e.g., Alarm,

Trouble, Restore, Open, Close, etc).

Ex.

S = Subscriber ID; A = Report Code

3+1 and 4+1

Expanded Formats

Ex. SSS(S) A

AAA(A) Z

Comprises a 3- (or 4-) digit subscriber number and a two-digit report code. The first digit

is displayed on the first line. The first digit is repeated on the second line 3 (or 4) times

followed by the second, “expanded” digit.

Ex. S = Subscriber ID; A = Report Code–1st digit; Z = Typically Zone Number–2nd digit

4+2 Format

Ex. SSSS AZ

Comprises a 4-digit subscriber number and 2-digit report code.

Ex.

S = Subscriber ID; A = Report Code; Z = Typically Zone Number)

ADEMCO Contact ID

Reporting Format

Ex. CCCC Q EEE GG ZZZ

Comprises a 4- or 10-digit subscriber number (depending on format selected), 1-digit

event qualifier (“new” or “restore”), 3-digit event code, and 3-digit zone number, user

number, or system status number (see below for example explanation).

ADEMCO Contact ID®

The ADEMCO Contact ID

Reporting Format comprises the following:

4-digit or 10-digit subscriber number (depending on format selected).

1-digit event qualifier (“new” or “restore”).

3-digit event code.

2-digit Partition No.

3-digit zone number, user number, or system status number (see table below).

ADEMCO Contact ID

Reporting takes the following format: CCCC(CCCCCC) Q EEE GG ZZZ

where: CCCC(CCCCCC) =Customer (subscriber) ID

Q = Event qualifier, where: E = new event , and R = restore

EEE = Event code (3 hexadecimal digits)

GG = Partition Number (system messages show “00”)

ZZZ = Zone/contact ID number reporting the alarm, or user number for open/close reports.

System status messages contain zeroes in the ZZZ location.

TABLE OF CONTACT ID EVENT CODES

(Some event codes may not apply to certain control panels;

for a complete list of event codes, refer to the central office receiver manual)

Code Definition

110 Fire Alarm

121 Duress

122 Alarm, 24-hour Silent

123 Alarm, 24-hour Audible

131 Alarm, Perimeter

132 Alarm, Interior

134 Alarm, Entry/Exit

135 Alarm, Day/Night

143 Alarm, Expansion Module

145 ECP Module cover tamper

146 Silent Burglary

150 Alarm, 24-Hour Auxiliary/Monitor zone

162 Carbon Monoxide

301 AC Power

302 Low System Battery/Battery Test Fail

305 System Reset (Log only)

321 Bell/Siren Trouble

333 Trouble, Expansion Mod. Supervision

341 Trouble, ECP Cover Tamper

344 RF Receiver Jam

351 Telco Line Fault

353 Long Range Radio Trouble

354 Failure to Communicate (log only)

373 Fire Loop Trouble

374 Exit Error Alarm

380 Global Trouble, Trouble Day/Night

381 RF Sensor Supervision

382 Supervision Auxiliary Wire Zone

Code Definition

383 RF Sensor Tamper

384 RF Sensor Low-battery

393 Clean Me

401 Disarmed, Armed AWAY, Armed MAXIMUM

403 Schedule Arm/Disarm AWAY

406 Cancel by User

407 Remote Arm/Disarm (Downloading)

408 Quick Arm AWAY

409 Keyswitch Arm/Disarm AWAY

441 Disarmed/Armed STAY/INSTANT,

Quick-Arm STAY/INSTANT

442 Keyswitch Arm/Disarm STAY

455 Scheduled Arm Fail

459 Recent Closing (SIA panels only)

570 Bypass

601 Manually Triggered Dialer Test

602 Periodic Test

606 AAV to Follow

607 Walk Test Entered/Exited

623 Event Log 80% Full

625 Real-Time Clock was Changed (log only)

627 Program Mode Entry (log only)

628 Program Mode Exit (log only)

642 Latch Key (log only)

750 -

789

Reserved for Configurable Zone Type report

codes (check with central station when using

these codes)

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-15PSIA Especificaciones Pagina 37

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-15PSIA