ADEMCO VISTA-15PSIA Especificaciones descargar pdf (Pagina 23)

– 23 –

XMIT TO CONFIRM

PRESS ✱ TO SKIP

Confirm

[∗] to continue

• If “Yes” was entered at the SET TO CONFIRM? prompt

previously (see first prompt following entry into the ∗58

Expert Programming Mode), the display on the left will

appear. Confirm serial and loop numbers by activating the

wireless key.

IMPORTANT:

When confirmed, the key is not active for arming/disarming until

it is assigned to a user number (using the assigning attributes

command, attribute “4”). See System Operation section for

procedure.

Entd A022-4063

Rcvd A022-4064

Not Confirmed

[∗] to continue

If the serial number transmitted does not match the serial

number entered, a display similar to the one shown will appear.

If the loop number does not match, it will also be displayed.

If so, activate the button on the wireless key once again. If a

match is not obtained (i.e., summary display does not appear),

press the [#] key and then enter the correct serial number.

If the serial number transmitted matches the serial number

entered, the keypad will beep 3 times and will return you to the

Zone Number prompt to enter the starting zone for the next

wireless key.

Or you can return to *58 Menu mode by pressing 00 at the Zone

Number prompt.

Wireless Key Predefined Default Templates

5834-013-V0

SERIAL #1

LOOP 4

SERIAL #1

LOOP 1

SERIAL #2

LOOP 1

SERIAL #2

LOOP 3

SERIAL #1

LOOP 3

SERIAL #

LOOP 4

SERIAL #1

LOOP 2

SERIAL #2

LOOP 2

5834-4 Wireless Key

Transmitter

LOOP 4

5804-001-V4

LOOP 3

LOOP 1

LOOP 2

5804 Wireless Key

Transmitter

LOOP 3

LOOP 1

LOOP 2

LOOP 4

RED/YELLOW

LED

•

GREEN/YELLOW

LED

ENROLL AS "BR"

5804BD-007-V1

5804BD 2-Way Wireless Key

Transmitter

NOTE: Some transmitters are not intended for use in UL installations.

For Button-Type Devices

TEMPLATE 1 Loop Function Zone Type TEMPLATE 4 Loop Function Zone Type

1 No Response 23 1 No Response 23

2 Disarm 22 2 No Response 23

3 Arm Away 21 3 Arm Away 21

4 No Response 23 4 Disarm 22

TEMPLATE 2 Loop Function Zone Type TEMPLATE 5 Loop Function Zone Type

1 No Response 23 1 No Response 23

2 Disarm 22 2 Arm Stay 20

3 Arm Away 21 3 Arm Away 21

4 Arm Stay 20 4 Disarm 22

TEMPLATE 3 Loop Function Zone Type TEMPLATE 6 Loop Function Zone Type

1 24-hour audible 7 1 24-hour audible 7

2 Disarm 22 2 Arm Stay 20

3 Arm Away 21 3 Arm Away 21

4 Arm Stay 20 4 Disarm 22

Deactivating & Removing a Wireless Key from the System

Deactivate a wireless key by deleting the associated user code:

Delete the User Code: Master code + [8] + 2-digit user no. + [#] [0]

Remove a wireless key from the system by deleting one of the wireless key zones using Zone Programming mode:

1. Press *56 while in Program mode then enter a zone number assigned to the wireless key.

2. Scroll through each prompt by pressing [∗] until the Input S/N prompt appears.

3. Enter 0 for the loop number and press [∗].

4. Exit program mode.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-15PSIA Especificaciones Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-15PSIA