ADEMCO VISTA-48D Especificaciones descargar pdf (Pagina 25)

3-5

Type 24

Silent Burglary

• Usually assigned to all sensors or contacts on windows and infrequently used

exterior doors where siren sounding is NOT desired for alarms.

• Provides an instant alarm, with NO audible indication at any keypad or external

sounder, if the zone is faulted when the system is armed in the Away, Stay,

Instant, or Maximum modes.

• A report is sent to the central station.

Type 77

Keyswitch

• Assign to zone wired to a keyswitch.

• Do not use devices assigned as input type “BR” with this zone type.

Type 81

AAV Monitor Zone

• Assign to zone connected to AAV module.

• Monitors 2-way voice sessions as follows:

- When the zone is faulted, all alarm sounding and dialer reporting stops, except

for fire alarms, which immediately terminate the voice session and cause

a fire report to be sent.

- When the zone is restored (session ended), sounding resumes (if bell timeout

has not expired) and reports that were stopped are sent.

Type 82

Blockschloss

• Used with special blockschloss lock and key.

• System arms 5 seconds after the key is fully turned (arms MAXIMUM); key can

then be removed.

• When armed, the blockschloss zone is shorted. An open circuit on this zone causes

trouble condition.

• If zones are “not ready,” the key will not turn fully and the system will not arm.

• Contact ID report code is 409.

• Once the system is armed using blockschloss, it can be disarmed only by the key;

wired keypads, RF keypads, and keyfobs cannot be used for disarming.

• If any zone in the system is assigned as blockschloss zone type, the system will not

arm in AWAY mode. The system can, however, be armed in STAY or INSTANT

modes from keypads and keyfobs even if the blockschloss zone is faulted.

Types 90-93

Configurable

• Allows for various custom responses.

• Options include response to entry/exit delays, response to opens/shorts, types of

alarm/trouble sounding, dial delay, and unique Contact ID report codes.

• Use *83 Menu mode to program these configurable zone types.

UL installations: Zone Types 90 -93 may not be used as fire or burglar alarm zones

on fire or UL burglar alarm installations.

NOTE: All of the zone types described are available for the wireless portion of the system, if used.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 79 80

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-48D Especificaciones Pagina 25

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-48D