ADEMCO Security System VISTA-10SE Manual de usuario descargar pdf (Pagina 4)

– 4 –

✱46 REPORT FORMAT

[0]

Also see field

✱27.

[0 = 3+1, 4+1 ADEMCO L/S STANDARD]

1 = 3+1, 4+1 RADIONICS STANDARD

2 = 4+2 ADEMCO L/S STANDARD

3 = 4+2 RADIONICS STANDARD

6 or undefined = 4+2 ADEMCO EXPRESS

7 = ADEMCO CONTACT ID REPORTING

8 = 3+1, 4+1 ADEMCO L/S EXPANDED

9 = 3+1, 4+1 RADIONICS EXPANDED

✱47 SPLIT/DUAL REPORTING

[0] 0 = Disable (Backup report only)

TO PRIMARY PHONE No. TO SECONDARY PHONE No.

1 = Alarms, Restore, Cancel Other Reports

2 = All Reports except Open/Close, Test Open/Close, Test

3 = Alarms, Restore, Cancel All Reports

4 = All Reports except Open/Close, Test All Reports

5 = All Reports (

Dual Reporting)

All Reports

A 10-digit code is sent to the pager consisting of

a 4-digit Subscriber #, a 3-digit Event code, & a

3-digit User or Zone #. See VISTA-10SE

Installation Instructions for an explanation of the

10-digit code.

TO PRIMARY PHONE No. TO PAGING No.* (SECONDARY)

6 = All reports except Open/Close ** Alarms, Open/Close, Troubles

7 = All reports ** Alarms, Troubles

8 = All reports ** Alarms, Open/Close, Troubles

9 = All reports except Open/Close ** Alarms, Open/Close for Users 5 –25

†

Troubles

* Can only be used if Primary reporting is Ademco Contact ID.

†

See field ✱ 47 in the DATA FIELD DESCRIPTIONS section.

✱48 15 SEC DIALER DELAY (BURG)

†

[0]

0 = no; 1 = yes

✱49 PERIODIC TEST MESSAGE

†

[0]

0 = none; 1 = 24 hrs; 2 = wkly; 3 = monthly. Enter Test Code in field ✱64.

✱50 SESCOA/RADIONICS SELECT

†

[0]

0 = Radionics (0-9, B-F reporting); 1 = SESCOA (0-9 only reporting)

Select 0 for all other formats.

✱51 CONFIRMATION OF ARMING DING

†

[0]

0 = no; 1 = yes; 2 = yes, but with RF arming only.

✱52 ZONE 3 RESPONSE TO OPEN

†

[0]

0 = 400 ms nominal; 1 = 10 ms nominal

†

Entry of a number other than one specified will give unpredictable results.

✱56 ZONE ASSIGNMENT/ALARM REPORT CODES (See explanation on next page)

ZONE ZONE ZONE ALARM RPT CODE INPUT RF INPUT

DESCRIPTION No. TYPE (Hex) TYPE LOOP

(Zn) (ZT) (RC) (In) (L)

Wired Zone 1 0 1 [01] HW —

Wired Zone 2 0 2 [04] HW —

Wired Zone 3 0 3 [03] HW —

Wired Zone 4 0 4 [03] HW —

Wired Zone 5 0 5 [09] HW —

Wired Zone 6 0 6 [07] HW —

Keypad Panic (✱ & #, or B) 0 7 [06] ——

Keypad Duress 0 8 — — ——

Tamper 0 9 0 5 ——

Keypad Panic (1 & ✱, or A) 9 5 [00] ——

Keypad Panic (3 & #, or C) 9 6 [00] ——

RF EXPANSION ZONES: With 4281L, up to 4 RF expansion zones available; 4281M or 4281H, up to 8; ENTER FOR

5881L, up to 8; 5881M or 5881H, up to 16.

↓

5800 ONLY

↓

ZONE ZONE ZONE ALARM RPT CODE INPUT RF INPUT

DESCRIPTION No. TYPE (Hex) TYPE LOOP

(Zn) (ZT) (RC) (in) (L)

1st RF Expansion Zone

2nd

3rd

4th

1 2 3 4 5 6 7 8 9 ... 23 24

Comentarios a estos manuales

Sin comentarios

ADEMCO Security System VISTA-10SE Manual de usuario Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Security System VISTA-10SE