ADEMCO Security System VISTA-10SE Manual de usuario descargar pdf (Pagina 16)

– 16 –

Example 1. Pager displays: 1234–911–004

This indicates that Subscriber No. 1234’s system is reporting an

Alarm (911), due to zone 4 being faulted (004).

Example 2. Pager displays: 1234–001–005

This indicates that Subscriber No. 1234’s system is reporting an

opening (001) by User 5 (005).

Note that no restore reports are sent to the pager.

Important:

AAV should not be used when Paging or Alarm Reports are being sent to a

Secondary number. If this is done, the call to the Secondary number by the

communicator after the alarm report will prevent the AAV from taking control

of the telephone line, and the AAV “Listen in” session cannot then take place.

✱

48 15-SECOND DIALER DELAY (BURGLARY) Default is 0.

Single-digit entry. If selected, will provide 15-second delay of burglary

alarm report to the central station. Allows time for subscriber to avoid a

false alarm transmission.

0 for no delay, or 1 for 15-second delay.

✱

49 PERIODIC TEST REPORT (1-Digit Entry) Default is 0.

Select the desired test report interval.

0 = none; 1 = 24 hours; 2 = weekly; 3 = 30 days.

Test Report code entered in field

✱

64 is sent; reports with Subscriber No.

For UL installations, 24 hours (1) must be selected

✱

50 SESCOA/RADIONICS SELECT (1-Digit Entry) Default is 0.

0 = Radionics (0–9, B–F reporting)

1 = SESCOA (0–9 only reporting)

Select 0 for all other formats.

✱

51 CONFIRMATION OF ARMING DING (1-Digit Entry) Default is 0.

Enter 1 to enable 1/2 second external alarm sounding “ding” when

closing report goes in, or at the end of exit delay. Enter 2 for alarm

sounding ding with RF arming (this will work with either a button RF

unit or a 5827.

0 disables the “ding”.

✱

52 ZONE 3 RESPONSE TIME TO OPEN (1-Digit Entry) Default is 0.

0 = 400ms nominal; 1 = 10ms nominal.

✱

56 ZONE ASSIGNMENT/ALARM REPORT CODES

This is an interactive menu mode that is used to program zone

numbers, zone types, alarm and report codes, and to identify the

type of loop input device.

This mode can also be used for entering 5800 series transmitter serial

numbers (serial numbers can also be entered using the Sequential Mode

✱

83, but only after all other zone programming has been completed in

✱

56).

Alpha descriptors can also be entered for zones in

✱

56 (alternatively,

Alpha descriptors can be entered in menu mode

✱

82).

Refer to the BASIC HARDWIRED ZONES 1–6 section in the Installation

Instructions for detailed hardwired zone programming, and the

WIRELESS (RF) ZONE EXPANSION (5700 & 5800 RF SYSTEMS) section for

detailed wireless zone expansion programming.

Refer also to the zone assignment table for

✱

56 in the programming form

in this manual.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios

ADEMCO Security System VISTA-10SE Manual de usuario Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Security System VISTA-10SE