ADEMCO 5130XM Manual de usuario descargar pdf (Pagina 6)

FUNCTIONS OF THE CONSOLE

1. DISPLAY WINDOW: A 2-line, 32-

character Liquid Crystal Display (LCD).

Displays protection point identification

and system status, messages, and

user instructions. See the FIXED

WORD DISPLAY CONSOLE table for

Fixed Word Display messages and

their meanings.

2. OFF KEY: Disarms the burglary

portion of the system, silences alarms

and audible trouble indicators, and

clears visual alarm trouble after the

problem has been corrected.

3. AWAY KEY:

Completely arms

both perimeter and interior burglary

protection for backup protection by

sensing an intruder’s movements

through protected interior areas as well

as guarding doors, windows, etc. Late

arrivals can enter through an entry

delay zone without causing an alarm if

the system is disarmed before the

entry delay time expires.

4. STAY KEY: Arms the perimeter

burglary protection, guarding doors,

windows and other perimeter protection

points, and sounds an alarm if one is

opened. Interior protection is not

armed, which allows movement within

your house without causing an alarm.

Late arrivals can enter through an

entry delay zone without causing an

alarm if the system is disarmed before

the entry delay time expires.

5. TEST KEY: Tests the system and

alarm sounder if disarmed. Refer to the

TESTING THE SYSTEM section for

test procedures.

6. BYPASS KEY: Removes

individual protection zones from being

monitored by the system. Displays

previously bypassed protection zones.

7. CHIME KEY: Turns on & off the

CHIME mode. When on, any entry

through a delay or perimeter zone

while the system is disarmed will

cause a tone to sound at the

Console(s).

-6-

8. [#] KEY: Permits ARMING of the

system without use of a security code

(“Quick Arm”, if programmed to do so).

9. KEYS O-9: Used to enter your

individual security access code(s).

10. CODE KEY: Allows the entry o~

additional user codes that can be

given to other users of the system.

11. [*] READY KEY:

When

depressed prior to arming the system,

the console will display all open

protection zones. This key is also

used to display all zone descriptors

that have been programmed for your

system, by holding the key down for

at least 5 seconds.

12. INSTANT KEY:

Arms in

manner similar to STAY mode, but

turns off the entry delay period,

offering greater security while inside

and not expecting any late arrivals.

An alarm will occur immediately upon

opening any perimeter protection

point, including entty delay zones.

13. MAXIMUM KEY:

Arms in

manner similar to AWAY mode, but

eliminates the entry delay period, thus

providing maximum protection. An

alarm will occur immediately upon

opening any protection point,

including entry delay zones.

14. POWER

INDICATOR:

(GREEN) Lit when primary power is

on. If off, system is operating on it’

backup battery power. CALL YOU-

INSTALLER IMMEDIATELY.

15. ARMED INDICATOR: (RED)

Lit when the system has been armed

(STAY,

AWAY, INSTANT or

MAXIMUM).

16. INTERNAL SOUNDER:

Source of audible internal warning and

confirmation sounds, as well as

alarms (see “Summary of Audible

Notifications”).

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Comentarios a estos manuales

Sin comentarios