ADEMCO VISTA-20HWse Guía para resolver problemas descargar pdf (Pagina 43)

–43–

For Fields

43,

44,

45, and

46:

Enter digits 0–9; # +11=B; #

+12=C; # +13=D; # +14=E; or #

+15=F.

Enter [

]

as the fourth digit if a

3-digit account number (for 3+1

dialer reporting format) is used.

Enter 0 as the first digit of a 4-

digit account number for Nos.

0000–0999. Exit field by

pressing [

]

(and press next

field number) if only 3 digits are

used.

To clear entries from field,

press

*, *

See blank Programming Form

for examples of Account No.

entries.

If using the paging feature, do

not enter a leading 0 in the

subscriber account number,

and do not use digits A-F

anywhere in the number. Some

paging systems provide voice

mail capability, which is

activated by a leading 0 in the

message.

43 PRIMARY SUBS ACCOUNT. No. (partition 1) | | |

See box at left.

44 SECONDARY SUBS ACCOUNT. No. (partition 1) Ê | | |

See box at left.

45 PRIMARY SUBS ACCOUNT. No. (partition 2) | | |

See box at left.

46 SECONDARY SUBS ACCOUNT. No. (part. 2) Ê | | |

See box at left.

47 PHONE SYSTEM SELECT 1

If Central Station Receiver

is not

on WATS line:

0 = Pulse Dial

1 = Tone Dial

If Central Station Receiver

on WATS line:

2 = Pulse Dial

3 = Tone Dial

48 REPORT FORMAT 7 0

0 = 3+1; 4+1 ADEMCO Low Speed Standard Prim. Sec.

1 = 3+1; 4+1 Radionics Standard

2 = 4+2 ADEMCO Low Speed Standard

3 = 4+2 Radionics Standard

6 = 4+2 ADEMCO Express

7 = ADEMCO Contact ID Reporting

8 = 3+1; 4+1 ADEMCO Low Speed Expanded

9 = 3+1; 4+1 Radionics Expanded

Enter

as the 4th digit of

43 through

46, if 3+1 dialer reporting is to be

used.

For an explanation of these formats, see

the

SYSTEM

COMMUNICATION

section

Note: The maximum number of alarm and alarm restore reports during

one armed period is determined by field

93.

49 SPLIT/DUAL REPORTING 0

Use options 0 - 5 when reporting to standard telephone receivers

TO PRIMARY TO SECONDARY

0 = All reports none, unless primary fails, then all

1 = Alarms, Restore, Cancel Others

2 = All except Open/Close, Test Open/Close, Test

3 = Alarms, Restore, Cancel All

4 = All except Open/Close, Test All

5 = All reports All

Use options 6 - 9 when reporting to a pager is desired

TO PRIMARY TO PAGING No.

6 = All reports except Open/Close Alarms, Open/Close, Troubles

7 = All reports Alarms, Troubles

8 = All reports Alarms, Open/Close, Troubles

9 = All reports except Open/Close Alarms, Open/Close for users 5-16

‡

Troubles

Can only be used is primary reporting format is Ademco Contact ID. See

explanation of pager report format below.

‡

Open/Close for users 1-4 are not reported.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 83 84

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-20HWse Guía para resolver problemas Pagina 43

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-20HWse