ADEMCO 4120XM Especificaciones descargar pdf (Pagina 5)

SYSTEM OVERV9EW

Fire Protection

The fire protection portion of your security system (if used) is always on, and

sounds an alarm if a fire condition is detected. Refer to the

F/RE ALARM

SYSTEM

section for important information concerning fire protection, smoke

detectors and planning emergency exit routes.

Burglary

The burglary protection portion of your system must be turned on or “armed”

Protection

before it can sense burglary alarm conditions and sound an alarm. Your system

can be armed in one of four modes: STAY, AWAY, INSTANT and MAXIMUM.

Refer to the

ARM//VG sections for instructions in using these modes of

operation. The principal differences between these four arming modes will be

seen in the chart below.

SUMMARY OF ARMING MODES

Arming

Features For Each Arming Mode

Mode

Exit

Delay Entry Delay Perimeter Armed

Interior Armed

AWAY

Yes

STAY

Yes

INSTANT

Yes

Yes No

MAXIMUM

Yes

Alarms

When an alarm occurs, both the console and external sounders sound, and the

console displays the protection zone(s) causing the alarm. If your system is

connected to a central monitoring station, an alarm message is also sent. To

stop the alarm sounding, simply disarm the system.

-5-

1 2 3 4 5 6 7 8 9 10 ... 59 60

Sin comentarios

ADEMCO 4120XM Especificaciones Pagina 5