ADEMCO 4120XM Especificaciones descargar pdf (Pagina 39)

TROUBLE CONDITIONS

FIXED-WORD CONSOLES

A display of CC in the numeric dkp/ay area: Indicates that the system is

communicating with the alarm monitoring station. If displayed for more than 10

minutes, call your service company.

A display of FC in the numeric display area:

This indicates that a failure has

occurred in the telephone communication portion of your

system, which means that

your system is not able to send messages to your alarm monitoring station. CAL.!.

FOR SERVICE IMMEDIATE Y.

A display of BA T and one or more zone numbers accompanied by a tone every

60 secoids at the console: This indicates that a low battery cond~ion exists in a

wireless sensor/transmitter.

We recommend that the battery be replaced as soon

as possible. The warning tones can be silenced by keying an OFF sequence (Code

plus OFF); after the new battery has been installed, the low battery message

display should clear within approximately 1 hour.

display of BAT with no zone numbers: This indicates that the system back-up

battery has a low battery condition. If there is no apparent cause for this (such as

AC power having been cut off for an extended period, or an alarm having caused

the external sounder to be activated for a long period), CALL FOR SERVICE

immediately.

Power Failure On all fixed-word consoles, if AC power to the system is cut off, the message

“NO AC” is displayed, and the Console is operating on battery power only.

On consoles with a POWER indicator, if AC power to the system is off, this

indicator will be off.

If only some lights are out on the premises, check circuit

and reset or replace as necessary.

CALL FOR SERVICE

be restored.

-39-

breakers and fuses

if AC power cannot

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 59 60

Sin comentarios

ADEMCO 4120XM Especificaciones Pagina 39