ADEMCO VISTA-250FBP Manual de usuario descargar pdf (Pagina 7)

VISTA-250FBP (3/17/2003) 13850 - 6

Detection and Alarm

c. Activated manually.

d. Assigned an alpha descriptor.

e. Used for Class B, Style-Y supervised bell outputs (4204CF

module).

f. A combination of 4204 (ECP) and 4101SN (polling loop) relays.

8. Optional Vista Interactive Phone Module – The control shall support the

ADEMCO 4285/4286 VIP Modules, which permit access to the security

system in order to perform the following functions:

a. Obtain system status information.

b. Arm and disarm the security system.

c. Control relays.

9. Optional LED Annunciator – The control shall support the ADEMCO

FSA-8 and FSA-24 annunciators, which are capable of:

a. Visually identifying a zone or point that is in alarm or trouble.

b. Programmable for system silence/reset.

c. Up to 96 LEDs may be used in one system.

d. A total of four (4) FSA-24 or 12 FSA-8 annunciators may be used

in one system.

e. An optional keyswitch, FSAKSM module, shall be available for

UL listed Silence and Reset capability.

10. Notification Appliance Circuits (NAC) – The Control Panel shall

internally provide two supervised NAC outputs for operating fire and

burglar alarm notification appliances. It shall also support additional

supervised bell outputs when using 4204CF relay modules. Each NAC

output shall be rated at 10-14 VDC, 1.7 amp max power limited. Total

alarm current draw when using two NAC outputs shall not exceed 2.3

amps for battery independent operation.

11. Auxiliary Relay – A built-in Form C relay shall be provided. The relay

contacts shall be rated at 28 VAC/VDC, 2.8 amps maximum. The relay

shall support:

a. Alarm activation.

b. Trouble/supervisory activation.

c. Reset of four-wire smoke detectors.

d. Battery saving feature.

12. Integrated Access Control – The control shall be capable of the following:

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

ADEMCO VISTA-250FBP Manual de usuario Pagina 7