ADEMCO VISTA-250FBP Manual de usuario descargar pdf (Pagina 6)

VISTA-250FBP (3/17/2003) 13850 - 5

Detection and Alarm

capable of being assigned the same or a different level of authority

for each partition that it will operate.

b. Opening/Closing central station reporting option.

c. Specific partitions that the code can operate.

d. Global arming capability (ability to arm all partitions the code has

access to in one command).

e. Use of an RF (button) to arm and disarm the system (RF key must

first be enrolled into the system).

5. Peripheral Devices – The control shall support up to 30 addressable ECP

devices, which can be any combination of keypads, RF receivers, relay

modules, annunciator modules, and interactive phone modules. Peripheral

devices have the following characteristics:

a. Each device set to an individual address according to the device's

instructions.

b. Each device enabled in system programming.

c. Each device’s address shall be supervisable (via a programming

option).

6. Keypad/Annunciator – The control shall accommodate up to 16 keypads

or six (6) touch-screen (i.e.; advanced user interface) keypads. The

keypads shall be capable of the following:

a. Performing all system arming functions.

b. Being assigned to any partition.

c. Providing four programmable single-button function keys, which

can be used for:

(1) Panic Functions –activated by wired and wireless keypads;

reported separately by partition.

(2) Keypad Macros –32 keypad macro commands per system

(each macro is a series of keypad commands). Assignable

to the A, B, C, and D keys by partition.

7. Optional Output Relays - A total of 96 relay outputs shall be

accommodated using relay modules. Each relay module shall provide four

(4) Form C (normally open and normally closed) relays for general-

purpose use or two (2) Class-B, Style-Y supervised notification appliance

circuit outputs, when using the 4204CF module. The relays shall be

capable of being:

a. Programmed to activate in response to system events.

b. Programmed to activate using time intervals.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

ADEMCO VISTA-250FBP Manual de usuario Pagina 6