ADEMCO VISTA-250FBP Manual de usuario descargar pdf (Pagina 13)

VISTA-250FBP (3/17/2003) 13850 - 12

Detection and Alarm

4. Electromagnetic Interference – The system shall meet or exceed the

requirements of FCC Part 15, Class B devices, FCC Part 68, IEC EMC

directive.

PART 3 EXECUTION

3.01 EXAMINATION

A. Submission of a proposal confirms that the Contract Documents and site

conditions are accepted without qualifications unless exceptions are specifically

noted.

B. The site shall be visited on a regular basis to appraise ongoing progress of other

trades and contracts, make allowances for all ongoing work, and coordinate the

requirements of this contract in a timely manner.

3.02 INSTALLATION

A. The System shall be installed and tested in accordance with the Manufacturer’s

Installation instructions. The following conditions are applicable:

1. In order to ensure a complete, functional System, for bidding purposes,

where information is not available from the Owner upon request, the worst

case condition shall be assumed.

2. Interfaces shall be coordinated with the Owner’s representative, where

appropriate.

3. All necessary backboxes, pullboxes, connectors, supports, conduit, cable,

and wire shall be furnished and installed to provide a complete and reliable

System installation. Exact location of all boxes, conduit, and wiring runs

shall be presented to the Owner for approval in advance of any installation.

4. All conduit, cable, and wire shall be installed parallel and square with

building lines, including raised floor areas. Conduit fill shall not exceed

forty percent (40%). All wires shall be gathered and tied up to create an

orderly installation.

3.03 TESTING AND CERTIFICATION

A. The Contractor shall demonstrate the functionality of the System upon completion

of installation, documenting the result of all tests and providing these results to the

Owner. The System shall be tested in accordance with the following:

1. The Contractor shall conduct a complete inspection and test of all installed

equipment. This includes testing and verifying connection to equipment of

other Divisions.

1 2 ... 8 9 10 11 12 13 14

Sin comentarios

ADEMCO VISTA-250FBP Manual de usuario Pagina 13