
7
Section 3.3: Vista-10/15/20 Programming Virtual Keypad option
The following must be turned on to use the Virtual Keypad option if you have a newer Ademco Vista
panel such as Honeywell Ademco Vista 10P / Vista 15P / Vista 20P / Vista 20PS / Vista 20PCN /
Vista 21iP
*193 Optional: Keypad 20: Enter “10” (Used for Remote Keypad Services)
When Done, To Exit Programming Press * 99. DO NOT PRESS * 98 or You Will Lock Yourself
Out Of Programming.
Comentarios a estos manuales