ADEMCO Vista-20PCN Manual de usuario descargar pdf (Pagina 5)

Chapter 3: Alarm Panel Configuration Settings

Section 3.1: Vista-10/15/20 Programming

To setup the Honeywell Vista 10/15/20 Series panels to output signals to Virtual Monitoring

network systems the following configuration options must be addressed:

Enter Programming (installer code 8 00) Default installer code is 4112. You will see 20 or

Installer Code 20 on the keypad display. To advance to a programming field, press * then the

field number. If you do not know the installer code and 4112 8 00 does not get you into

programming, email info@virtualmonitoring.biz with your user name and we will send you

instructions for getting into programming.

• *29 (Long Range Radio Output: Enter 1)

The Primary and Secondary Telephone Numbers only needs to be programmed if you are

sending reports via a Standard Phone line to a Central Station in Conjunction with the Virtual

Monitoring Notification Services.

• *41 (Primary Phone No. or Delete if not in use by entering *.)

• *42 (Secondary Phone No. or Delete if not in use by entering *.)

• *43 (Primary Subscriber ID. Input 4 Account No. from your dealer or set to '0000' if not

used.)

• *54 (Dynamic Signaling Enter "0" for Redundant Reporting.)

• *55 (Dynamic Signal Priority Enter "1" for LRR output first.)

1 2 3 4 5 6 7 8 9 10 11

Sin comentarios

ADEMCO Vista-20PCN Manual de usuario Pagina 5