ADEMCO VISTA 10 Manual de usuario descargar pdf (Pagina 5)

– 5 –

∗

∗∗

∗90 Event Log Enables

[3]

NOTE

System messages are logged when any non-zero entry is made.

0 = None; 1 = Alarm/Alarm Restore; 2 = Trouble/Trouble Restore

4 = Bypass/Bypass Restore; 8 = Open/Close.

Example: To select “Alarm/Alarm Restore”, and “Open/Close”, enter 9

(1 + 8); to select all, enter #15.

∗

∗∗

∗91 Option Selection [8, 0]

Options: 0 = None Options VISTA-10PSIA

4 = AAV UL: must use ADEMCO UVCM module Call Wait Disable

8 = Exit Delay Restart/Reset UL: must be disabled

#+12 = AAV and Exit Delay Restart/Reset

SIA Guidelines: Exit Delay should be enabled.

VISTA-10PSIA: Options: Same as listed above.

Call Waiting Disable:

0 = call waiting not used

1 = call waiting disable digits (*70) entered in field *40; (when

selected, the system dials the entry in field *40 only on

alternate dial attempts; this allows proper dialing in the event

call waiting service is later canceled by the user).

∗

∗∗

∗93 Reports In Armed Period [1,0]

Per Zone (Swinger Suppression) Restrict VISTA-10PSIA

Restrict Report Pairs: Report Pairs Unlimited

0 = Unlimited Reports; 1 = 1 report pair Reports Enable

2 = 2 report pairs SIA Guidelines: Must be set for option 1 or 2.

VISTA-10PSIA:

Restrict Report Pairs: 1 = 1 report pair; 2 = 2 report pairs

Unlimited Reports Enable:

0 = restrict reports to the setting in entry 1

1 = unlimited reports for zones listed in zone list 7; (use zone list 7

to enter those zones that require unlimited reporting; these

zones ignore the setting in entry 1)

DOWNLOAD INFORMATION

∗

∗∗

∗94 Download Phone No.

| | | | | | | | | | | | | | | | | | |

Enter up to 20 digits, 0–9; #+11 for '

✱

'; #+12 for '#'; #+13 for a 2-second

pause. Do not fill unused spaces. If fewer than 20 digits, exit field by

pressing

✱

. To clear entries, press

✱

UL: downloading may be performed only if a technician is at the site.

∗

∗∗

∗95 Ring Count For Downloading

[15]

NOTE: Do not enter “0” if using 4285/4286 Phone Module.

0 = Disable Station Initiated Download;

1–14 = number of rings (1–9, # +10 =10, # +11 =11,

# +12 =12, # +13 =13, # +14 =14);

15 = answering machine defeat (# +15 =15).

∗

∗∗

∗96, *97 Initialize/Reset Defaults

(

These are commands, not data fields. See page 2

)

∗

∗∗

∗98, *99 Exit Commands

(

These are commands, not data fields. See page 2

)

PAGER OPTIONS

∗

∗∗

∗160 Pager 1 Phone No.

| | | | | | | | | | | | | | | | | | |

Enter up to 20 digits. 0–9; #+11 = '

✱

'; #+12 = '#'; #+13 = 2-sec pause.

∗

∗∗

∗161 Pager 1 Characters

| | | | | | | | | | | | | | |

Enter the optional prefix characters, up to 16 digits.

0–9; #+11 = '

✱

'; #+12 = '#'; #+13 = 2-second pause.

∗

∗∗

∗162 Pager 1 Report Options

[0]

0 = no reports sent

1 = Opens/closes all users

4 = All alarms and troubles

5 = All alarms / troubles, and opens/closes for all users

12 = Alarms / troubles for zones entered in zone list 9

13 = Alarms / troubles for zones entered in zone list 9, and

opens/closes for all users

∗

∗∗

∗172 Pager Delay Option For Alarms

[3]

0 = none, 1 = 1 minute, 2 = 2 minutes, 3 = 3 minutes

This delay is for ALL pagers in the system.

MISCELLANEOUS SYSTEM FIELDS

∗

∗∗

∗177 Device Duration 1, 2 [0] [0]

(used in *80 Menu mode-Device Actions 5/6) 1 2

0 = 15 seconds 6 = 2-1/2 min #+11 = 7 min

1 = 30 seconds 7 = 3 min #+12 = 8 min

2 = 45 seconds 8 = 4 min #+13 = 10 min

3 = 60 seconds 9 = 5 min #+14 = 12 min

4 = 90 seconds #+10 = 6 min #+15 = 15 min

5 = 2 minutes

∗

∗∗

∗181 60 Hertz AC Operation

[0]

0 = 60 Hz; 1 = 50 Hz

CONFIGURABLE ZONE TYPE OPTIONS

∗

∗∗

∗182 Configurable Zone Type 90

1 2 3 4 5 6 7 8 9 10

Enter the appropriate value for each entry, 1-10, based on the charts

provided on the next page. Each entry is the sum of the values of its

selected options

(0-9, #+10=10, #+11=11, #+12=12, #+13=13, #+14=14, #+15=15).

UL: Do not configure zones as a fire alarm or UL burglar alarm zone.

∗

∗∗

∗183 Zone Type 90 Report Codes

IMPORTANT: Use existing Contact ID® codes, if appropriate, or

define unique codes in CID code range 750-789. See note in

installation instructions.

90 ALARM ID: XXX

TROUBLE ID: XXX

Enter the desired 3-digit Contact ID® report codes for alarms and

troubles occurring on zones assigned to this zone type. Enter the

codes sequentially (all 6 digits). When entering digits, [#] moves

cursor back, [∗] moves forward. Press [∗] when done to continue.

KEYPAD OPTIONS

(Options for keypad 1, address 16, are set by the factory and cannot be changed.)

NOTE: Each keypad must be assigned a unique address. Keypads

programmed with the same address will give unpredictable results.

∗

∗∗

∗190 Keypad 2 Device Address 17

[0] [0]

Enable: 0 = disabled; 1 = enabled Enable Sound

Sound: 0 = no suppression

1 = suppress arm/disarm and E/E beeps

2 = Suppress chime beeps only

3 = suppress arm/disarm, E/E, and chime beeps

Enable Sound

∗

∗∗

∗191 Keypad 3 Device Address 18

[0] [0]

∗

∗∗

∗192 Keypad 4 Device Address 19

[0] [0]

∗

∗∗

∗193 Keypad 5 Device Address 20

[0] [0]

∗

∗∗

∗194 Keypad 6 Device Address 21

[0] [0]

∗

∗∗

∗195 Keypad 7 Device Address 22

[0] [0]

∗

∗∗

∗196 Keypad 8 Device Address 23

[0] [0]

∗

∗∗

∗197 Exit Time Display Interval

[0]

0 = no display; 1-5 = seconds between display refresh

NOTE: If enabled and using only 2-digit fixed-word keypads (e.g.,

6150RF), do not set exit delay time greater than 96 seconds. See

Installation Instructions for explanation.

∗

∗∗

∗199 ECP Fail Display

[0]

0 = 3-digit display (“1” + device address)

1 = 2-digit fixed-display as “91”

1 2 3 4 5 6 7 8 9 10 ... 15 16

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA 10 Manual de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA 10