
MAINTAINING YOUR SYSTEM
Silencing Low
Battery Warning
Tones at the
Console
Routine Care
●
●
●
The console’s warning tones can be silenced by performing an OFF sequence (code
plus OFF key), but the Console’s low battery message display will remain on as a
reminder that you have a low battery condition in one or more of your sensors. When
you replace the weak battery with a fresh one, the sensor will send a “good battery”
signal to the control as soon as the sensor is activated (opening/closing of door,
window, etc.), causing the low battery display to turn off. If the sensor is not activated,
the display WIIIautomatically clear within approximately 1 hour.
Treat the components of your security system as you would any other electrical
equipment. Do not slam sensor-protected doors or windows.
Keep dust from accumulating on the console and all protective sensors, particularly on
motion sensors and smoke detectors.
The console and sensors should be cleaned carefully with a dry soft cloth. Do not
spray water or any other fluid on the units.
Comentarios a estos manuales