ADEMCO VISTA-5OUL Guía de usuario descargar pdf (Pagina 22)

BYPASSING PROTECTION ZONES

Using the ❑

This key is used when you want to arm your system with one or more zones

BYPASS Key

intentionally unprotected. Bypassed zones are unprotected and will not cause an alarm

when violated while your system is armed. All bypasses are removed when an OFF

sequence (security code plus OFF) is performed. Bypasses are also removed if the

arming procedure that follows the bypass command is not successful.

Note: The system will not allow fire or emergency zones to be bypassed.

To bypass zones, the system must be disarmed first.

BYPASS

Enter your security code and press ❑ .

Enter zone number(s) for the zones to be bypassed (e.g., 01, 02,03, etc.).

Important!

All single-digit numbers must be preceded by a zero (for example, enter

01 ‘for zone 1). -

B~/7355~lF~OflT

LIPST/71RS8EL?ROOfl

Typical bypass message

L?1517RREOBYPRS5

RE131Y TOt?RI’/

When finished, the console will display the word BYPASS

along with each bypassed zone number. Wait for these

zones to be displayed before arming. Arming the system

before bypassed zones are displayed eliminates all

bypasses.

Arm the system as usual when the console displays “ready”

to arm message.

-22-

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 65 66

Sin comentarios

ADEMCO VISTA-5OUL Guía de usuario Pagina 22