ADEMCO VISTA-5OUL Guía de usuario descargar pdf (Pagina 40)

PROGRAMMING DEVICE TIMERS

P%Rl

Emil

Enter the time you want the device turned on using 00:01-

11:59 format. When the display shows the desired time, press

the * key to move to the AM/PM field. Press any key O-9 to

change the AM/PM indication.

Enter 00:00 if this timer is not being used to turn something ON

for the days selected below. (ex. using one timer to turn lights on

one day and using another timer to turn them off on another day).

Enter the time you want the device turned off using 00:01-

11:59 format. When the display shows the desired time, press

the * key to move to the AM/PM field. Press any key O-9 to

change the AM/PM indication.

Enter 00:00 if this timer is not being used to turn something

OFF

for the days selected below. (ex.

using one timer to turn lights on

one day and using another timer to turn them off on another day).

Select the days on which the device is to be activated by

entering 1-7 (Monday = 1). An “X” will appear under that day,

indicating the output for that day is active. Entering a day’s

number again will deactivate that day. Pressing Owill turn all days

on/off. The outputs will only be in effect for the days which have

the letter x underneath them. As the week progresses, the

selected days are reset to the deactive state, unless the

permanent option is selected (next screen prompt). When

completed, press * to continue.

Answering 1 (yes) means the system will continue executing this

timer on a continuous basis. An answer of O means execute each

day’s output only once.

-40-

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 65 66

Sin comentarios

ADEMCO VISTA-5OUL Guía de usuario Pagina 40