ADEMCO VISTA-5OUL Guía de usuario descargar pdf (Pagina 39)

PROGRAMMING QEVICE TIMERS

General Information Device timers consist

Ofan ON time&an OFF time, and selected days of the week in which

they are active. There are up to 20 timers that can be used to control various devices,

such

as lights or appliances. Your installer will have programmed the appropriate devices into the

system (up to 16

devices can be programmed).

Each timer controls a single device (designated as an output number) that you select. For

example, timer 1 might be set to turn the porch lights on at 7:OOpm and turn them off at

11:OOpm.Timer 2 might turn on the air conditioner Monday-Friday at

4:30pm to cool the

premises before you arrive at 5:OOpm, and turn it off at 10:OOpm when you are retiring for

the night. If desired, different timers can control the same device. For example, timer 2

could be used Monday-Friday as in the previous example, and timer 3 could be set to turn

the air conditioner on and off

at different times Saturday and Sunday.

To enter the device timer menu mode:

1. Enter your security code, then press the

❑key followed by 83.

06 07:OOP 11:45P

PORCH LITE 04

See your installer for device

numbers.

IE!EKl

Up to 20 timers can be programmed. Each timer is identified by a

number 1-20. Enter the desired timer number to be programmed

(1-20). Press *to accept entry.

If that timer number has already been programmed, a summary

screen will appear. In this example:

06= Timer # 04 = Output Device # affected by this timer

PORCH LITE = Output Descriptor for Device # 4

0700PM = Start Time; 11:45PM = Stop Time

Press * to continue.

Enter the desired output device number (1-16). As the number is

entered, the device’s description will appear.

To delete a previously programmed timer, enter 00 as the output

number.

-39-

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 65 66

Sin comentarios

ADEMCO VISTA-5OUL Guía de usuario Pagina 39