ADEMCO Vista AT Guía de usuario descargar pdf (Pagina 29)

– 29 –

Schedules:

master code + [#] + [6] [4].

No. Event Device No. Access

Group

Partition Start Stop Repeat Random

(see list

below)

for “01” events:

(see device list

below)

for “02” events:

enter 1-8

for “04-06”

events: enter

1, 2, or 3

Time/

Day

Time/

Day

(1-4) (yes/no)

Events: 00 = remove event 03 = child not home report 06 = auto disarm

01 = device on/off 04 = STAY arm 07 = display “reminder”

02 = user access 05 = AWAY arm 08 = disarm time window

Repeat Options: 0 = none; 1 = repeat weekly; 2 = repeat every other week; 3 = repeat every third week; 4 = repeat every fourth week

WARNING!

THE LIMITATIONS OF THIS ALARM SYSTEM

While this system is an advanced design security system, it does not offer guaranteed protection against

burglary or other emergency. Any alarm system, whether commercial or residential, is subject to compromise or

failure to warn for a variety of reasons. For example:

• Intruders may gain access through unprotected openings or have the technical sophistication to bypass an

alarm sensor or disconnect an alarm warning device.

• Intrusion detectors (e.g.,, passive infrared detectors), smoke detectors, and many other sensing devices will not

work without power. Battery operated devices will not work without batteries, with dead batteries, or if the

batteries are not put in properly. Devices powered solely by AC will not work if their AC power supply is cut

off for any reason, however briefly.

• Signals sent by wireless transmitters may be blocked or reflected by metal before they reach the alarm

receiver. Even if the signal path has been recently checked during a weekly test, blockage can occur if a metal

object is moved into the path.

• A user may not be able to reach a panic or emergency button quickly enough.

• While smoke detectors have played a key role in reducing residential fire deaths, they may not activate or

provide early warning for a variety of reasons in as many as 35% of all fires. Some of the reasons smoke

detectors used in conjunction with this System may not work are as follows. Smoke detectors may have been

improperly installed and positioned. Smoke detectors may not sense fires that start where smoke cannot reach

the detectors, such as in chimneys, in walls, or roofs, or on the other side of closed doors. Smoke detectors also

may not sense a fire on another level of a residence or building. A second floor detector, for example, may not

sense a first floor or basement fire. Moreover, smoke detectors have sensing limitations. No smoke detector

can sense every kind of fire every time. In general, detectors may not always warn about fires caused by

carelessness and safety hazards like smoking in bed, violent explosions, escaping gas, improper storage of

flammable materials, overloaded electrical circuits, children playing with matches, or arson. Depending upon

the nature of the fire and/or the locations of the smoke detectors, the detector, even if it operates as

anticipated, may not provide sufficient warning to allow all occupants to escape in time to prevent injury or

death.

• Passive Infrared Motion Detectors can only detect intrusion within the designed ranges as diagrammed in

their installation manual. Passive Infrared Detectors do not provide volumetric area protection. They do

create multiple beams of protection, and intrusion can only be detected in unobstructed areas covered by those

beams. They cannot detect motion or intrusion that takes place behind walls, ceilings, floors, closed doors,

glass partitions, glass doors, or windows.

1 2 ... 24 25 26 27 28 29 30 31 32

Comentarios a estos manuales

Sin comentarios

ADEMCO Vista AT Guía de usuario Pagina 29

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Vista AT