ADEMCO Vista-20PCN Especificaciones Pagina 6
- Pagina / 88
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Compatible Devices
•
Supports up to 8 Addressable Keypads: Fixed-Word Display Keypad (6150), Alpha Keypad (6160)
•
Supports 4219, 4229 addressable hardwire zone expander modules (VISTA-20P = up to five for up
to 40 expansion zones; VISTA-15P = up to 2 for up to 16 expansion zones)
•
Supports 5881 series receiver and 5800 series transmitters
•
Output relays and/or Powerline Carrier Devices (X-10 type) plus two on-board triggers (VISTA-20P
= up to 16 relays/devices; VISTA-15P = 8 relays/devices)
-- Use any combination of 4204, 4229 and or Powerline Carrier Devices.
-- Output functions (up to 48)
•
Ademco 4285/4286 Phone Module (Part. 1 only); provides access to the system via on premises or
off-premises phones for arming, disarming, etc., plus control of relay outputs and Powerline
Carrier devices.
•
Audio Alarm Verification (using AAV module, such as Eagle Model 1250); can be used in
conjunction with an output trigger to permit voice dialog between an operator at the central station
and a person at the premises.
•
Alarm output provides a 12VDC, 2 AMP output that can drive the compatible sounders; steady
output for burglary/panic, or temporal pulse (3 pulses – pause – 3 pulses – pause – 3 pulses. . .) for
fire. Uses current limiting circuitry for protection.
•
Auxiliary Power Output: 12VDC, 600 mA maximum (uses PTC for protection).
•
Backup Battery Rechargeable (sealed lead-acid type) 12VDC, 4AH minimum.
•
Long Range Radio Primary telephone number messages can be reported via ECP connection to
various Long Range Radios (check compatibility and availability of specific models)
•
AC Power Supply: Plug-in 120VAC transformer, ADEMCO 1321 or, if using Powerline Carrier
devices, ADEMCO 1321X10 Transformer Module
NOTE: All devices and accessories used in a Canadian installation must be Listed for use in Canada.
Important Installation Highlights (Installer Please Read)
•
This system uses addressable keypads and Zone Expander Modules (see table of addresses in
Programming Overview section).
•
Keypads must be set for addresses 16-23 (first keypad is address 16, which is different from
previous controls) and programmed in data fields *190-*196.
•
Zone Expander Modules must be set for specific addresses (07-11), based on the zone numbers used
(see table of addresses in 4219/4229 Expansion Zones section).
•
4204 Relay Modules must be set for specific addresses (12-15; see Connecting Relay Modules
section).
•
This control will not power-up unless AC power is connected (will not power-up on battery alone).
However, once the system is powered up, it will operate on battery power in the event of AC loss.
•
Relays have two programming menu modes: Use *79 Menu mode to map module addresses and
device (output) numbers. Use *80 Menu mode to define the output functions (see Output Device
Programming section).
•
This system supports programmable function keys. Use *57 Menu mode to define the function keys
(see Function Key Programming section).
•
This system provides various paging features. Refer to the Programming Overview section for a
summary on pager programming.
Installation and Setup Guide
1-2
- 9,67$39,67$3&1 1
- 9,67$39,67$3&1 1
- SOUNDING OF FIRE NOTIFICATION 2
- APPLIANCES 2
- Table Of Contents 3
- SECTION 1 5
- Capabilities 5
- Functions 5
- Compatible Devices 6
- SECTION 2 7
- Cabinet and Lock 7
- Mounting the PC Board Alone 7
- Wiring to Keypads 9
- Sounder (Bell) Connections 10
- Wiring the AC Transformer 10
- Backup Battery 11
- Earth Ground 11
- IMPORTANT: 12
- 4219/4229 Expansion Zones 13
- Installing a 5800TM Module 14
- Installing the Transmitters 14
- Installing the RF Receiver 14
- Installing a Keyswitch 15
- † Applies to VISTA-20P only 16
- † e.g., Altronix AX-RSB 17
- Installation Instructions 18
- Long Range Radio Connections 19
- AAV Connections 19
- Programming Overview 21
- Pager Programming 22
- Function Keys 23
- Output Devices 23
- Zone Type Definitions 23
- Mechanics of Programming 25
- Data Field Programming 27
- Zone Sounds & Timing ( 28
- Dialer Programming ( 29
- System Status Report Codes ( 30
- Restore Report Codes ( 31
- Miscellaneous System Fields 32
- Pager Programming Fields 34
- Zone Conditions Represented 37
- Keypad Programming Fields 38
- Zone Programming 39
- 41
- Completing Zone Programming 42
- Not Confirmed 45
- Output Device Programming 47
- Activated By 50
- Zone List 50
- Zone Type 50
- Zone Number 51
- Output Action 51
- Output Number 51
- Summary Screen 51
- Zone Lists 53
- Function Key Programming 55
- Alpha Descriptor Programming 57
- Adding Custom Words 59
- ALPHA VOCABULARY LIST 60
- Creating Schedules 61
- HH MMAM 62
- 0=NO 1=YES X 62
- System Communication 63
- Ademco Contact ID 64
- System Operation 67
- Stay zone list 68
- Panic Keys 69
- Testing the System 71
- Go/No Go Test Mode 72
- 1=DIAL, 0=WALK 73
- SECTION 14 75
- SECURITY CONTROL 75
- COMPATIBLE DEVICES 75
- System Sensor 76
- (Personal 77
- Emergency Transmitter) 77
- Regulatory Agency Statements 79
- UL NOTICES 80
- Limitations and Warranty 81
- (Continued) 82
- – NOTES – 83
- – INDEX – 85
- VISTA-20P/VISTA-15P 87
- ¬.§l 88
Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Vista-20PCN
(61 paginas)
Los Sistemas De Control De Acceso De Seguridad ADEMCO Vista-128B PLUS Guia de preparacion
(72 paginas)
(72 paginas)
Los Sistemas De Control De Acceso De Seguridad ADEMCO Security System VISTA-15CN Guia de preparacion
(132 paginas)
(132 paginas)
Los Sistemas De Control De Acceso De Seguridad ADEMCO Ademco VISTA-40 Manual de usuario
(20 paginas)
(20 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.038 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales