ADEMCO Vista Guía de usuario descargar pdf (Pagina 26)

– 26 –

PAGING FEATURE

General

If the paging feature has been programmed for your system, your pager will respond to

certain conditions as they occur in your system by displaying a 10-digit code. This

code indicates the type of condition that has occurred.

Code Format The 10-digit pager code takes the following form:

SSSS-EEE-NNN

SSSS = 4-digit subscriber number (this number will always appear at the beginning of

the pager display)

EEE = 3-digit number describing the event that has occurred as follows:

911 = Alarm (NNN following indicates the zone that caused the alarm)

001 = Open, system disarmed (NNN following indicates user number)

002 = Close, system armed (NNN following indicates user number)

811 = Trouble (NNN following indicates the zone that caused the trouble)

NNN = 3-digit user or zone number, depending on the type of event that occurred

Examples:

Pager displays: 1234–911–004

This indicates that your system (subscriber 1234) is reporting an alarm (911) due to a

fault on zone 4 (004).

Pager displays: 1234–001–005

This indicates that your system is reporting an open/disarm (001) by user 5 (005).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Sin comentarios

ADEMCO Vista Guía de usuario Pagina 26