ADEMCO VISTA-50PEN Instrucciones de operaciones descargar pdf (Pagina 42)

– 42 –

Speed Key (Macros)

General Information

The “A”, “B”, “C”, and/or “D” keys can be used to activate a string of

commands up to 32 keystrokes each. These commands are known as a macro

and are stored in the system’s memory. Typical Speed Key functions include:

• Arming sequences that involve first bypassing certain zones before

arming.

• Seldom used but repeatable sequences.

• Relay activation sequences.

Defining

To program a macro, enter your user code + [#] + [D]. The following appears:

ENTER SPEED KEY #

01-32 00=QUIT

Enter the 2-digit Speed Key number (01-32) being defined and press [*].

Enter up to 32 keystrokes. A Speed Key sequence can include different

commands. Press the "D" key to separate different commands. For example,

you may want to perform the following sequence.

GOTO partition 2......................Enter *2

Bypass zones 10 & 11...............Press bypass [6], then the zone numbers 010

& 011

Arm in maximum mode............Press maximum [4] key

Return to partition 1 ................Enter *1

To program that Speed Key sequence, type the following:

*2 D

6010011 D 4D *1 D D

Note that the "D" key is pressed after each command. Press "D" twice to

complete the entry and exit.

NOTE: When defining Speed Key sequences, do not use the [#] key to

represent Quick Arming. The system uses the code entered in

response to the prompt to initiate commands in a Speed Key sequence,

so the quick arm key is unnecessary. The system interprets the use of

the [#] key in a Speed Key sequence as its designated function only.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 83 84

Sin comentarios

ADEMCO VISTA-50PEN Instrucciones de operaciones Pagina 42