ADEMCO VISTA-20SE Guía de usuario descargar pdf (Pagina 5)

Vista 20SEa Training Guide Page 5

Vista 20a

8 Basic wired zones

Vista 20SEa

8 Basic wired zones

Optional Siren / Bell Supervision

Not Available on Vista 20a

Optional Siren / Bell Supervision

( Console beeps and displays check 70 while

panel dials and sends a Contact id event for

siren/bell tamper )

Confirmation of Arming Ding

Location *38

Enter 1 (in either or both partitions) to enable ½

second external alarm sounding “Ding” at Kiss off

(when closing report goes in), or at the end of exit

time if Open and Close (Arm away only) is not

enabled.

Enter 0 in this location to disable this feature.

Confirmation of Arming Ding

Location *38

Enter 1 (in either or both partitions) to enable ½

second external alarm sounding “Ding” at Kiss off

(when closing report goes in), or at the end of exit

time if Open and Close (Arm away only) is not

enabled.

Enter 2 for RF key arming only notification “Ding”.

Note: The ½ second “Ding” will occur instantly

when armed away by RF key, even If the open

and close reports are enabled, It doesn’t wait for

the end of exit time.

Enter 0 in this location to disable this feature

Option Selection

(Field *91)

Enter “0” if an AAV unit is not being used

(default)

Enter “4” if an Audio Alarm Verification (AAV)

unit is connected.

Option Selection

(Field *91)

Enter “0” if not being used (default).

Enter “1” To restrict User code #15 option for

Open/Close Reporting (applies for both

partitions).

Enter “4” if an Audio Alarm Verification (AAV)

unit is connected.

Enter “8” To enable Exit Delay Restart.

This feature is only applicable, if armed in the

STAY or INSTANT mode (See User Guide).

You can Restart the Exit Delay at any time after

arming in the INSTANT or STAY mode by

pressing the “*” Key.

Example: For restricted User #15 Open/Close

Reporting and to enable Exit Delay restart, press

“9” = 1 + 8 options.

Auxiliary Power Output The Same as Vista 20a

Download Programming (V-link and Compass)

Download Programming (Compass only)

Communication Format Supported

Ademco Contact ID & Audio

The Same as Vista 20a

Zone type 10

(Perimeter Burglary with pre-Alarm)

A trip on this Zone type will start Entry delay #1, if

tripped when the panel is armed in the STAY or

INSTANT modes, regardless of weather or not an

Entry/Exit delay zone was tripped first.

Note: No pre-alarm delay is provided if tripped

when panel is armed in the AWAY or MAXIMUM

modes.

Zone type 10

(Interior With Delay)

A trip on this Zone type will start Entry delay #1, if

tripped when the panel is armed in the AWAY

mode, regardless of weather or not an Entry/Exit

delay zone was tripped first.

Note: This type of Zone is bypassed when the

panel is armed in the STAY or INSTANT mode.

No pre-alarm delay is provided if tripped when

panel is armed in the MAXIMUM mode.

1 2 3 4 5 6 7 8 9 10 ... 33 34

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-20SE Guía de usuario Pagina 5

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-20SE