ADEMCO VISTA 10 Guía de usuario descargar pdf (Pagina 25)

– 25 –

PANIC KEYS

For Manually Activating Silent and/or Audible Alarms

Using the Panic Keys

Your system may have been programmed to use special keys or pairs of keys

to manually activate emergency (panic) functions. The functions that might

be programmed are:

Silent Emergency, Audible Emergency, Personal Emergency, and Fire.

A silent emergency sends a silent alarm signal to the central station*, but

there is no audible alarm or visual display.

An audible emergency sends a signal to the central station* and sounds a

loud, steady alarm at your keypad(s) and at any external sounders that are

connected (“ALARM” plus a zone number are also displayed).

A personal emergency alarm sends an emergency message to the central

station* and sounds at keypad(s), but not at external bells or sirens.

A fire alarm sends a fire alarm message to the central station* and uniquely

sounds at keypad(s) and external bells and sirens (“FIRE” plus a zone

number are also displayed).

See next page for panic functions that have been assigned to keys. Also see

the Duress Code feature on Page 11.

To Initiate a Panic Function at Any Time of Day or Night:

•

Press an active lettered key ([A], [B], or [C]) for at least two seconds.

•

Or, if lettered keys are not present on the keypad:

•

Press both keys of an active pair at the same time.

If connected to a central station.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 39 40

Sin comentarios

ADEMCO VISTA 10 Guía de usuario Pagina 25