
-12-
Section 4: SYSTEM OPERATION
––––––––––––––––––––––––––– USER ACCESS CODES ––––––––––––––––––––––––––––
Adding a Secondary User Code
MASTER CODE + [CODE KEY] + USER # ( 2-7) + DESIRED 4-DIGIT ACCESS CODE.
(The system will emit a single beep when a secondary code has been successfully entered.)
Changing the Master Code
MASTER CODE + [CODE KEY] + [1] + NEW MASTER CODE + NEW MASTER CODE AGAIN
Deleting a Secondary User Code
MASTER CODE + [CODE KEY] + USER # (2-7)
Notes:
• All Master and Secondary security codes permit access to the system for arming, disarming, etc.
• If a secondary code is inadvertently repeated for different users, the lower user number will take
priority.
• Opening and closing reports are sent for the Master as user number 1. User codes are sent as numbers
2-7, respectively.
–––––––––––––––––––––––– KEYPAD FUNCTIONS ––––––––––––––––––––––––––
System Commands
Before arming, the system must be in the READY condition (all zones must be intact). If the "NOT
READY" message appears, press the READY [
*
] key to display faulted zones.
SUMMARY OF SYSTEM COMMANDS
MODE HOW TO PERFORM EXIT DELAY ENTRY DELAY PERIMETER
ARMED
INTERIOR ARMED
AWAY Security Code + [2] Yes Yes Yes Yes
STAY Security Code + [3] Yes Yes Yes No
INSTANT Security Code + [7] Yes No Yes No
MAXIMUM Security Code + [4] Yes No Yes Yes
DISARM Security Code + [1]
BYPASS Security Code + [6] +
Zone #(s)
QUICK BYPASS
(if enabled)
Security Code + [6]
CHIME MODE Security Code + [9]
(toggles on and off)
SITE-INITIATED
DOWNLOAD*
Master Code + [#] + [1]
* Initiates phone call to the downloading facility.
Panic Keys
A panic function is activated when:
• Both keys of the appropriate key pair are pressed at the same time, or
• The appropriate lettered key is pressed for at least 2 seconds.
The panic functions are identified by the system as follows:
Keys Displayed as Zone Zone Type
[1] & [
*
], or [A] 95 24-Hr. Silent
[
*
] & [#], or [B] 7 Programmable (24-Hr.
Silent, Audible,
Auxiliary, or Fire
[3] & [#], or [C] 96 24-Hr. Audible
Notes:
• Keys [A], [B], [C] are not on all keypads.
• Key [D], if present, is not active here.
Keyswitch LED Indications
RED MEANING
OFF DISARMED & NOT READY
SLOW FLASH ARMED READY
RAPID FLASH ARMED
Keyswitch Operation
• To arm AWAY, turn key and release within a 1/2 second.
• To arm STAY, turn and hold key for longer than 2 seconds.
• To disarm, turn key and immediately release.
Comentarios a estos manuales