ADEMCO Vista-32FB Guia de preparacion descargar pdf (Pagina 15)

1-1

SECTION 1

General Description

•••••••••••••••••••••••••••••••••••••••••••••••••

About the VISTA-32FB

The VISTA-32FB is a two-partition, UL Listed Commercial Fire and Burglary control panel. The Control can also be

used as a slave communicator in conjunction with an external fire alarm panel: For use as a slave communicator, refer

to Section 11 of this manual. Unless otherwise indicated, all other information in this manual describes the control

panel as a Commercial Fire/Burglary detection system.

Features

Hardwire and Optional Expansion Zones

• Provides eight hardwire zones.

• Supports up to 16 2-wire smoke detectors each on zone 1 and zone 2 (32 total).

• Triggers the built-in sounders on other hardwired smoke detectors if one smoke detector annunciates an alarm.

• Supports up to 50 2-wire latching glassbreak detectors on zone 8.

• Supports up to 24 additional expansion zones using a built-in polling (multiplex) loop.

• Supports up to 32 wireless zones fewer if using hardwire and/or polling loop zones.

• Provides three keypad panic keys: 1 + ✴ (A), ✴ + # (B), and 3 + # (C).

Peripherals Devices

• Supports up to 31 addressable devices, (keypads, RF receivers, relay modules, etc.).

• Supervises devices (keypads, RF receivers, and relay modules) and individual relays (up to 32), as well as system

zones (RF receivers and keypad panics).

• Provides 96 outputs using 4204 and 4204CF Relay Modules, and V-Plex Relay Modules can activate outputs in

response to system events (alarm condition), at a specific time of day, at random times, and manually using the #70

Relay Command Mode.

• Supports one additional style-Y supervised Notification Appliance Circuits using a 4204CF.

• Supports the ADEMCO 4146 Keyswitch on either of the system's two partitions.

Arming/Disarming and Bypassing

• Provides global arming capability (ability to arm all partitions the user code has access to in one command).

• Supports Exit Error Logic, whereby the system can tell the difference between a regular alarm and an alarm caused

by leaving an entry/exit door open. If the system is not subsequently disarmed, faulted entry/exit zone(s) and/or

interior zones are bypassed and the system arms.

• Supports Recent Close report, which is designed to notify the central station that an alarm has occurred within 2

minutes after the exit delay has expired.

Partitioning

• Can control two separate areas (partitions) independently, each functioning as if it had its own separate control. All

fire zones must be assigned to partition 1.

• Provides a Common Lobby partition, which can be programmed to arm automatically when the other partition is

armed, and to disarm when the other partition is disarmed.

• Provides a Master partition (3) used for the purpose of viewing the status of all partitions at the same time.

• Can display fire, burglary, panic, and trouble conditions at all other partitions’ keypads (selectable option).

Scheduling

• Can automate system functions, such as arming, disarming, and activation of outputs (e.g., lights).

• Provides an End User Output Programming Mode, allowing the user to control outputs.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 127 128

Comentarios a estos manuales

Sin comentarios

ADEMCO Vista-32FB Guia de preparacion Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Vista-32FB