ADEMCO VISTA-120 Guía de usuario descargar pdf (Pagina 12)

– 12 –

BYPASSING ZONES

Using the 6

BYPASS Key

This key is used when you want to arm your system with one or

more zones intentionally unprotected. Bypassed zones are

unprotected and will not cause an alarm when violated while your

system is armed. All bypasses are removed when an OFF

sequence (security code plus OFF) is performed. Bypasses are

also removed if the arming procedure that follows the bypass

command is not successful.

To Bypass a

Zone:

1. Enter the security code. Then press BYPASS [6] and enter

the 3-digit number(s) of zone to be bypassed (ex. 005 for

zone 5).

BYPASS 007 FRONT

UPSTAIRS BEDROOM

Typical bypass

message

All bypassed zones will be

sequentially displayed when you are

finished entering the number of zones

to be bypassed. The console will then

display a bypass message as a

reminder that one or more zones is

bypassed.

DISARMED BYPASS

READY TO ARM

Arm the system as usual when the

keypad displays the "ready" to arm

message. Bypassed zones are

unprotected and will not cause an alarm

when violated while your system is

armed.

Notes: 1. All system zone bypasses are removed when an

OFF sequence (security code + OFF) is performed.

2. An option can be provided by your installation

company that will allow zones to be bypassed

when the system is armed. Bypass(es) can then

be removed while the system or partition remains

armed by repeating the same command sequence

used to bypass the zone(s).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 57 58

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-120 Guía de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-120