ADEMCO Vista-10P Guía de usuario descargar pdf (Pagina 32)

– 32 –

Scheduling

SchedulingScheduling

Scheduling

About Scheduling

About SchedulingAbout Scheduling

About Scheduling

The system provides one end-user schedule (programmable by master/installer only),

which can control various types of events.

• The schedule causes a defined event to start and stop (when appropriate) at a

specified time.

• The schedule can be set to automatically repeat at various intervals.

• The schedule can be set for random starting, if desired.

Creating Schedules

Creating SchedulesCreating Schedules

Creating Schedules

1. + [#] + [6] [4]

(Master Code)

Alpha Displays:

1 DISARMED

READY TO ARM

2. Enter “01” as the 2-digit schedule number.

Press [∗] to continue.

ENTER SCHED NO.

00=QUIT 00

3. Enter the desired 2-digit event number from the

following list.

00 = clear the scheduled event

01 = turn a programmed output on or off

ENTER EVENT

(see Using Device Commands section for a list of output device numbers

used in your system)

02 = set a user access schedule for one or more users

(see Security Codes section for an explanation of access groups)

03 = send a “latch-key” report to a pager if the system is not disarmed by a

specified time; message sent is “777-7777.”

04 = automatically arm the system in STAY mode at a specified time

05 = automatically arm the system in AWAY mode at a specified time

06 = automatically disarm the system at a specified time

07 = Display the word “REMINDER” at a specified time

(if selected, the keypad beeps every 30 seconds beginning when the word

“REMINDER” is first displayed, and alternates with the normal keypad

display about every 4-5 seconds. To stop the beeps and cancel the display

once it starts, simply press any key.

Press [∗] to continue.

4. For event number “01,” enter the output number

associated with this schedule.

Otherwise, this prompt is skipped.

Press [∗] to continue to the “Start” prompt below.

RELAY NUMBER

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 63 64

Comentarios a estos manuales

Sin comentarios

ADEMCO Vista-10P Guía de usuario Pagina 32

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Vista-10P