ADEMCO Vista-10P Guía de usuario descargar pdf (Pagina 20)

– 20 –

Bypassing Protection Zones

Bypassing Protection ZonesBypassing Protection Zones

Bypassing Protection Zones

Using the BYPASS Key

Using the BYPASS KeyUsing the BYPASS Key

Using the BYPASS Key

Use this key when you want to arm your system with one or more zones intentionally

unprotected.

Vent Zones: Your system may have certain windows set as “vent” zones, which are

automatically bypassed if left open when arming the system (you do not need to

manually bypass them). However, if a vent zone window is closed after arming, it

becomes protected and will cause an alarm if opened again while the system is armed.

When bypassing zones:

• The system must be disarmed before you can bypass zones.

• Bypassed zones are unprotected and will not cause an alarm if violated.

• The system will not allow fire zones to be bypassed.

• Zones are automatically unbypassed when the system is disarmed.

+ 6 + zone number (see below)

(Security Code) BYPASS

Enter the 2-digit zone number for the zone to be

bypassed. Single digit zone numbers must be

preceded by a zero (e.g. 05, 06).

Repeat the command string for each zone to be

bypassed.

Alpha Display:

DISARMED

HIT * FOR FAULTS

Fixed-Word Display: NOT READY

2. After each command string, the keypad

momentarily displays a "Bypass" message for the

bypassed zone number.

rm the system as usual. When armed, the arming

message is displayed with “ZONE BYPASSED.”

To display bypassed zones prior to arming, enter

your security code and press the [6] BYPASS key.

Alpha Display:

DISARMED BYPASS

READY TO ARM

Fixed-Word Display: BYPASS

ARMED: STAY

ZONE BYPASSED

Typical armed alpha display after

bypassing zones.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 63 64

Comentarios a estos manuales

Sin comentarios

ADEMCO Vista-10P Guía de usuario Pagina 20

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO Vista-10P