ADEMCO LYNX Manual de usuario Pagina 4

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 16
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 3
- 4 -
Field Function Programmed Values [ ] = Table 1 Default Value
34
EXIT DELAY
|
[70]
00-99 = exit delay time (in seconds).
UL installations = 60 seconds max.
35
ENTRY DELAY 1 (zone type 01)
|
[30]
00-99 = entry delay time (in seconds);
UL installations = 45 seconds max.
36
ENTRY DELAY 2 (zone type 02)
|
[60]
00-99 = entry delay 2 time (in seconds);
UL installations = 45 seconds max.
37
AUDIBLE EXIT WARNING /
[1, 1]
QUICK EXIT
Exit Warn Quick Exit
0 = no; 1 = yes
38
CONFIRMATION OF ARMING DING
† [0]
0 = no; 1 = yes (when armed by self-contained keypad or RF)
2 = yes (when armed by RF keypad only).
39
POWER UP IN PREVIOUS STATE
† [1]
0 = no; 1 = yes; UL installations = 1
Entry of a number other than one specified will give unpredictable results.
DIALER PROGRAMMING (
40–
53)
In fields
40,
41,
42, enter up to the number of digits shown. Do not fill unused spaces. Enter 0–9; #+11 for '
';
#+12 for '#'; #+13 for a pause.
40
PABX ACCESS CODE
Enter 6 digits. If fewer than 6 digits are entered,
pressing
advances to the next field. To clear entries from field,
press
40
.
41
PRIMARY PHONE No.
Enter up to 20 digits; Do not fill unused spaces. If fewer than 20
digits entered, pressing
advances to the next field. To clear
entries from field, press
41
.
42
SECONDARY PHONE No.
Enter up to 24 digits; Do not fill unused spaces. If fewer than 24
digits entered, pressing
advances to the next field. To clear
entries from field, press
42
.
For fields *43 , *44:
Enter 0–9; #+11 for B; #+12 for C; #+13 for D; #+14 for E; [#+15 for F]. Enter
as 4th digit, if 3+1 dialer
reporting is to be used. If only 3 digits used, pressing
advances to the next field.
To clear entries from field, press
43
or
44
.Examples:
For Acct.
1234
, enter: 1 | 2 | 3 | 4
; For Acct.
B234
, enter: #+11| 2 | 3 | 4
For Acct.
123
, enter: 1 | 2 | 3 |
Vista de pagina 3
1 2 3 4 5 6 7 8 9 ... 15 16

Comentarios a estos manuales

Sin comentarios