ADEMCO LYNX Guia de preparacion descargar pdf (Pagina 3)

- 3 -

TO LOAD A DEFAULT SET:

While in Program mode, press

✻

97, then enter a number 1-4 corresponding to the default table desired. See

the Installation Instructions for the default tables. Enter 0 if you are not selecting a default table.

TO EXIT PROGRAMMING MODE:

✻

98 Exits programming mode and prevents re-entry by: Installer Code + 8+ 0 + 0. If

✻

98 is used to exit

programming mode, system must be powered down, then press [

✻

] and [#] within 50 seconds of power

up to re-enter programming mode.

✻

99 Exits programming mode and allows re-entry by: Installer Code + 8 + 0 + 0 or: Power-up, then press

[

✻

] and [#] within 50 seconds of power up.

DATA FIELDS

Field Function

Programmed Values [ ] = Table 1 Default Values

SYSTEM SETUP (

✱

20–

✱

30)

✱

20 INSTALLER CODE

[4112]

Enter 4 digits, 0–9

✱

21 QUICK ARM ENABLE

†

[1]

0 = no; 1 = yes

✱

22 KEYPAD BACKLIGHT TIMEOUT

[0]

0 = none (backlighting always on); 1 = backlight off after 10secs

✱

23 FORCED BYPASS

†

[0]

0 = none; 1 = bypass open zones

UL installations = 0

✱

24 RF HOUSE ID CODE

| [00]

00 = disable all wireless keypad usage;

01–31 = 5804BD/5804BDV house ID

✱

POWERLINE CARRIER DEVICE

HOUSE CODE

[0]

0 = A; 1 = B, 2 = C, 3 = D, 4 = E, 5 = F, 6 = G, 7 = H, 8 = I,

9 = J, #10 = K, #11 = L, #12 = M, #13 = N, #14 = O, #15 = P

✱

26 CHIME BY ZONE

†

[0]

0 = no; 1 = yes (program zones to chime on zone list 3)

✱

27 REAL TIME CLOCK DISPLAY

†

[1]

0 = no; 1 = yes, display time on keypad

✱

29 DAYLIGHT SAVING TIME

START/END MONTH

[4, 10]

Start End

1-9, #+10,#+11,#+12. Enter 0,0 if no daylight savings time used.

✱

30 DAYLIGHT SAVING TIME

START/END WEEKEND

[1,5]

Start End

0=disable; 1=first; 2=second; 3=third; 4=fourth;

5=last; 6=next to last; 7=third from last

†

Entering a number other than the one specified may give unpredictable results.

1 2 3 4 5 6 7 8 ... 23 24

Comentarios a estos manuales

Sin comentarios

ADEMCO LYNX Guia de preparacion Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO LYNX