ADEMCO 4160-12 C-COM Especificaciones descargar pdf (Pagina 8)

both trouble and closing reports.

3. Report to Secondary Phone bmber Oily

The system allows for the various conxnunicator reports to be divided

between two central:stations (or two receivers). This option is

chosen in some situations, where,

for example, all alarms may be

routed to a primary alarm receiver while non-critical items, such

as troubles or open and closing reports, might be routed to a secondary

receiver.

Ml scel laneow ~unlcator qrtions

All kssages On (he Cilll

As shipped, the system is set up with a feature that gives alarm

messages priority over trouble messages and other non-alarm

messages, when sending in a format other than Ademco High Speed.

For example,

if an alarm message for the primary receiver occurs

while the communicator is reporting shunt conditions to the

secondary receiver, the coaxnunicator will abort the shunt reports.

It will then call the primary receiver to report an alarm.

After the alarm has been reported, the camnunicator will resume

reporting the shunts.

Optionally, the system may be made to finish all messages to

the active phone number before switching to the other phone

nunber.

Duress kssage to Second Phone Mmber

When PROM selected, this option routes duress messages to the

secondary receiver.

AC Fafl/Test/lm Battery to Second Phone ?hmber

When PROM selected, this option routes AC Failure and Restore,

Low Battery, and Test reports to the secondary receiver.

Lou Battery l&port

Fomt

Selat

As shipped, when using Ademco High Speed Format, the system

. will report Low Battery messages as follows:

ACCT 5555 5555 8 Low Battery

A PROM option is available that enables battery failure reporting

in a different manner (See Section on Hi.gh Speed Format). This

format also allows battery restore reports to be, transmitted.

Dual Report

When PROM selected, this option causes alJ coaxnunicator messages

to be sent to both a primary receiver and a secondary receiver.

628-8

685

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 58 59

Comentarios a estos manuales

Sin comentarios

ADEMCO 4160-12 C-COM Especificaciones Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO 4160-12 C-COM