ADEMCO VISTA-250FBP Guía de usuario descargar pdf (Pagina 66)

– 66 –

Quick Guide to Burglary System Functions

FUNCTION PROCEDURE COMMENTS

Check Zones Press [✱]. To view faulted zones when is system not ready

Display All

Descriptors

Press and hold [✱] for 5 seconds. Displays all alpha descriptors programmed by

installer.

Arm System Enter code.

Press arming key desired (AWAY,

STAY, INSTANT, MAXIMUM).

Arms system in mode selected.

NOTE: After pressing the STAY or INSTANT

arming key, enter 1, 2 or 3 to arm in

the desired STAY or INSTANT mode.

Disarm System Enter code. Press OFF [1]. Disarms system and silences alarms.

Bypass Zones Enter code. Press BYPASS [6].

Enter zone numbers to be

bypassed (use 3-digit entries).

Press [✱] + [✱].

Bypassed zones are unprotected and will not

cause an alarm if violated.

Quick Bypass Enter code. Press BYPASS [6].

Press [#].

Bypasses all faulted zones automatically.

Group Bypass Enter code. Press BYPASS [6].

Press [✱]. Enter Group Number

(01-15)

Bypasses all zones assigned to the group.

Chime Mode Enter code. Press CHIME [9]. Keypad will sound if doors or windows are

violated while system disarmed.

Test Mode Enter code. Press TEST [5] Activates alarm sounder and allows sensors to

be tested.

View Messages Press and hold [0] for at least 5

seconds.

Message from central station will appear.

View User

Capabilities

Enter user's code. Press [✱] + [✱]. Displays partitions and authority levels

assigned to the user.

GOTO Partition Enter security code. Press [✱].

Enter partition number (1-8).

0 returns to default partition.

Allows a user at one keypad to perform

functions in another partition, if that user is

authorized to do so.

Self-Help Press and hold any function key for

at least 5 seconds.

Will display abbreviated instructions for the key

pressed.

Add a User Enter master/manager code.

Press CODE [8].

Enter new user's user number.

Enter code for that user.

Enter authority for that user in this

partition (1-5).

Follow prompts, 1=Yes, 0=No.

Master and Manager level users can add users

to the system, each with its own code and

authority level.

Change a User's

Code

Enter master/manager code.

Press CODE [8].

Enter user's 3-digit number.

Enter new code for that user.

Press 0 (No) at prompt.

Master and Manager level users can change

their own or other users' codes.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 79 80

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-250FBP Guía de usuario Pagina 66

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-250FBP