ADEMCO VISTA-100 Manual de usuario descargar pdf (Pagina 2)

An ADEMCO Group Company

ADDITIONAL FEATURES

◆ Notification Appliance Circuits (Two)

— Programmable

— Temporal code compliant

— Individually silenceable

◆ Programmable on-board auxiliary relay

◆ SIA false alarm reduction features:

— Exit error logic

— Exit delay reset

— Cross zoning

— Call waiting defeat

— Recent close report

◆ Supports hardwired, V-Plex (addressable) polling

loop and wireless zones

◆ Hardwired zones

— Provides eight style B hardwired zones

— EOLR supervised for Fire and UL burglary

installations

— Supports N.O or N.C. sensors

— Individually assignable to one or all eight

partitions

— Up to 16 two-wire smoke detectors on zones

one and two (32 total)

— Four-wire smoke or heat detectors on zones

one to eight

— Up to 50 two-wire glass break detectors on

zone eight

◆ Patented V-Plex (addressable) polling loop

technology

— Supports up to 120 two-wire multiplex

zones/points

— Can use existing wiring

— Global polling technology for faster

processing

— Increased current draw capacity (128mA)

— Individually assignable to partitions,

notification circuit (bell) output or aux relay

— 4,000 ft capability without the use of

shielded cable

— Extender/Isolation bus module

— Two-wire smoke detector zone/group

expansion module adds two or four zones

— Eight zone - Class A and B extender module

— Eight zone - Class B extender module

— One zone supervised contact monitor module

◆ UL Listed wireless smoke detector expansion

— Supports up to 87 wireless zones using 5881

receiver

— Supervised by control for check-in signals

— Tamper protection for transmitters

— Individually assignable up to eight partitions

— Supports UL864/NFPA listed/complaint

wireless smoke detectors

◆ Scheduled uploading of events to central station

VISTA-100

control/communicator

12345678

ARMED

READY

ARMED

READY

Commercial

Wireless

Devices

Key switch

option

4-146

5140 LED Communicator

Status Module

5140DLM

8 CLASS B HARDWIRE ZONES

4100SM

Printer

Interface Module

RS232

6220S Printer

Phone line to Control Station

772OULF

Long Range Radio

Transmitter

-5881 Series

Wireless Receiver

(Max two)

V-Plex Loop

-32 Character

Red- Alpha

Keypad

-Programmable

Relay

-Supervised Relay

or NAC (Bell) circuit

Additional Notification Circuits

using 4204 CF Module

4208U

4193SN

5881 RF Receiver

Glass break Detectors

Manual Pull Stations

MPS - 1*

MPS - 2*

MPS - 5*

MPS - 10*

Tamper Switch*

Flow Switch*

Low Temp Switch*

*Use w/4193SN

Mini-Zone Module

4208U 8 Contact

Zone Module

Zone 1

Zone 2

Zone 3

Zone 4

Zone 5

Zone 6

Zone 7

Zone 8

2-ZN Module

4209U Group

Zoning Remote

Module

4209U 4208SNF

APPLICATIONS

The VISTA-100 control is well suited for a variety of applications as

an integrated fire and burglary control. A diverse line of ADEMCO

initiating and control devices supports this extremely powerful

control. Some of the applications supported are: medical and

professional buildings, supermarkets, churches or synagogues, office

buildings, schools, universities, strip malls, and factory or warehouse

environments.

INSTALLATION

The VISTA-100 alarm system has been designed to mount both

quickly and easily in an attack resistant cabinet. It meets all

applicable requirements for UL commercial Fire and Burglary

installations and is NFPA72 compliant.

SPECIFICATIONS

Electrical:

Primary power:

— 120VAC to ADEMCO No. 1451 Transformer Secondary rated

18VAC, 72VA

Quiescent current draw:

— 350mA

Backup battery:

— 12VDC, 12AH min to 34.4AH max

— Lead acid battery (gel type)

Alarm power:

— 12VDC, 1.7A max for each notification (bell) circuit output

Backup battery:

— 12VDC, 12AH min to 34.4AH max

— Lead acid battery (gel type)

Alarm power:

— 12VDC, 1.7A max for each notification (bell) circuit output

Aux. standby pwr:

— 12VDC, 1A max

Total power:

— 2.3A at 12VDC, 3.4A at 24VDC from all sources

Standby time:

— 24 hours with 1A standby load or 60 hours with 205mA max

standby load using 34.4AH battery

Fusing:

— Battery input, aux. and notification (bell) circuit outputs are

protected using PTC circuit protectors. All outputs are power

limited.

Main Dialer:

Line seize:

— Double Pole

Ringer equiv.:

— 0.7B

Formats:

— ADEMCO Low Speed, ADEMCO 4+2 Express, ADEMCO High

Speed, ADEMCO Contact ID, Sescoa and Radionics

4297

VISTA-100

Notification (Bell) Circuits

5192 Series Smoke Detectors

4192 Series Smoke Detectors

5881EH

1 2 3

VISTA-100 1

Comentarios a estos manuales

Sin comentarios

ADEMCO VISTA-100 Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad ADEMCO VISTA-100