ADEMCO Vista-15PCN Guía de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 56
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
– 6 –
6\VWHP2YHUYLHZ
&RQWLQXHG
Zones and Partitions
The system sensing devices have been assigned to various “zones,” which are
specific areas of protection (e.g., front door, kitchen window, etc.).
Zone numbers are displayed at the keypad when an alarm or trouble condition
occurs on a sensor.
Partitions (VISTA-20P) provide two independent areas of protection, with each
partition containing a group of zones that can be armed and disarmed without
affecting other zones or users.
Partitioned systems (VISTA-20P) can include a common zone area, which is an
area shared by users of both partitions (such as a lobby in a building).
Arming, Step-Arming and Disarming Burglary Protection
The system must be armed before the burglary protection can sense intrusions.
To arm your system, enter your user code followed by the desired arming key.
If programmed, the [#] key can be pressed instead of entering the security code
when arming the system.
You can also use the step-arming key, if programmed, to arm the system, which
lets you use a function key to arm the system in one of three modes by simply
pressing the key repeatedly.
To disarm the system, enter your user code then press the [OFF] key.
Alarms
When an alarm occurs, both the keypad and external sounders will sound, and
the keypad will display the zone(s) causing the alarm.
If your system is connected to a Central Monitoring Station, an alarm message
will also be sent.
To stop the alarm sounding, simply disarm the system.
Memory of Alarm
When an alarm condition occurs, the keypad displays the number(s) of the
zone(s) that caused the problem, and displays the type of alarm.
The message remains displayed even after disarming the system, but can be
cleared with another “off” sequence.
Technical Manuals Online! - http://www.tech-man.com
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11 ... 55 56

Comentarios a estos manuales

Sin comentarios