ADEMCO Symphony 8142 Guía de usuario Pagina 25

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 80
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 24
Security System Operation (Cont'd)
25
To check the status of other partitions perform the following:
SCREEN ACTION
1. From the "Home" screen press the
SECURITY
button to display the "Arming"
screen.
2. Press the "Current Partition" tab (lower edge
of the screen; in this case it displays
P1
). The
"User Authorization" screen is displayed with
the instructions
For Authorized Partitions,
Enter Code
.
3. Enter the code authorized to access other
partition(s).
If the code is accepted, the system displays
the partitions that user has access to.
NOTE:
A code may have access to some (but
not all) of the available partitions.
This screen displays the available partitions (in
this case, Partitions 1 and 2), and their current
status.
The current partition is shown at the top of the
display (in this example, the device is attached
to Partition 1 (
P1
)). To change this
assignment, select the appropriate button (e.g.
press
P2
to switch control to Partition 2).
Vista de pagina 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 79 80

Comentarios a estos manuales

Sin comentarios