ADEMCO AHDR4 Instrucciones de operaciones descargar pdf (Pagina 150)

6.9.8 Patrol (PATTERN)

From the MAIN menu press the PATROL key to enter the menu for carrying out the movement controls.

START PATTERN 1…3

Used to perform the corresponding Pattern

STOP PATTERN

Used to stop the corresponding Pattern.

START PATROL

Used to carry out Patrol.

STOP PATROL

Used to stop Patrol.

The function stops when the position of the movement in progress is reached (also in the case of

joystick operation).

6.9.9 Preset, Scan and Home

Important note!

The 'Scan' and 'Patrol' instructions given in the dome manual do not correspond to the generally

accepted usage in this manual: for practical purposes the functions take the 'standard' meanings

and not those suggested by the dome manual:



‘preset’ means to store the current position



‘scan’ means the pan & tilt movement towards a previously stored position; in the dome

manual this function is called ‘preset’



‘patrol’ means a series of ‘scans’, where the previously stored positions are shown one after

the other in sequence; in the dome manual this function is called ‘scan’.

The PRESET, SCAN and HOME functions are as described in the general explanation with the following

limitations specific to the dome (see § 4.4.7.1 - Preset, pag.47 e see § 4.4.8 - SCAN MENU, pag.49).

Type Minimum position Maximum position Notes

PRESET 1 127 Can only be stored via the dome OSM

(for SCC64-1P)

SCAN 1 127

HOME Execution of SCAN control to position

Page 147 of 193 MNVADCT _0409

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 195 196

Sin comentarios

ADEMCO AHDR4 Instrucciones de operaciones Pagina 150